Vol. 45 (2019): Forestry, Forest, Paper and Woodworking Industry

View Vol. 45 (2019): Forestry, Forest, Paper and Woodworking Industry

In this Collection of Reaserch Papers the result of studies which are focused on scientific achievements in the field of forestry and silviculture, forest and paper industry.  As well as the results of studies in the field of forest restoration and enrichment of forest resources, and forest protection, ecological problems of the environment and sustainable management of natural resources are analyzed. New aspects of resource-saving and environmentally-friendly of the woodworking and furniture technologies are considered.

The Collection is designed for researchers, faculty members of educational institutions, a wide audience of forestry sector, forest, paper and woodworking industry professionals.

Published: 2019-12-29

Full Issue

Articles

  • IMPROVED DESIGN OF CIRCULAR SAW WITH COMBINED GEAR CROWN FOR LONGITUDINAL SAWING OF WOOD

    M.I. Pylypchuk, V.V. Shostak, V.I. Taras, S.A. Salovskyy, M.V. Ditkovskyy
    5-12
    DOI: https://doi.org/10.36930/42194501

  • Anaerobe treatment of organicwaste

    І.G. Voytovych
    13-16
    DOI: https://doi.org/10.36930/42194502

  • Strengthening of structural steel st3 by high-speed friction method in the technological environment of carbon

    Yu.P. Kapral, Yu.I. Ozymok, M.R. Burdyak, B.I. Palyuh
    17-21
    DOI: https://doi.org/10.36930/42194503

  • A investigation of technological processes of making beds of double different designs

    S.V. Gayda, Ya.M. Bilyy, S.V. Voronovych
    22-31
    DOI: https://doi.org/10.36930/42194504

  • Investigation of the process of bonding interlining materials to flexible bases

    S.A. Hrytsak, M.M. Ilkiv, V.R. Solonynka, Ya.M. Bilyy
    32-38
    DOI: https://doi.org/10.36930/42194505

  • A determination and comparison of properties of post-consumer wood of the basic conifers

    S.V. Gayda, L.E. Lesiv
    39-46
    DOI: https://doi.org/10.36930/42194506

  • Research of the influence of the operating parameters of the process of heat treatment of the wood of ash on the form stability of the combined furniture boards

    M.M. Ilkiv, V.R. Solonynka, S.A. Hrytsak, Ya.M. Bilyy
    47-54
    DOI: https://doi.org/10.36930/42194507

  • Comparison of technological characteristics of linseed oil and alkyd varnish

    L.A Yaremchuk
    55-58
    DOI: https://doi.org/10.36930/42194508

  • Energy function of beech forestsin Bukovyna Precarpathian region

    R.D. Vasylyshyn, V.V. Slyusarchuk, I.P. Lakyda
    59-64
    DOI: https://doi.org/10.36930/42194509

  • Invasion of emerald ash borer Agrilus planipennis Fairmaire (Coleoptera: Buprestidae): the tactic of actions

    Iryna Matsiakh
    65-90
    DOI: https://doi.org/10.36930/42194510

  • Modeling of the plywood making process glued with thermoplastic polymer

    R.O. Kozak, I.I. Kusniak
    95-98
    DOI: https://doi.org/10.36930/42194511

  • Floristic composition of vegetable groups of oak plantations of Polisya of Ukraine after continuous cutting

    I.D. Ivanyuk, T.M. Ivanyuk
    99-103
    DOI: https://doi.org/10.36930/42194512

  • Analysis of volumetric output of lumber, taking into account the quality classes of dust raw materials

    V.O. Mayevskyy, O.B. Ferents, Z.P. Kopynets, Yo.V. Andrashek , O.M. Mayevska
    104-110
    DOI: https://doi.org/10.36930/42194513

  • Research of reliability and stability of automatic lines in woodworking

    R.Ya. Orikhovskyy
    111-114
    DOI: https://doi.org/10.36930/42194514

  • The role of forestry measures in the formation of highly productive mixed oak forest

    V.O. Agiy , S.L. Kopiy, Yu.Y. Kaganyak, L.I. Kopiy, M.I. Kopiy, A.A. Novak, I.V. Fizyk-Nadsluchansjkyy
    115-124
    DOI: https://doi.org/10.36930/42194515

  • The influence of the amount of carbon in steels on the physicomechanical characteristics of surface layers during hardening by high-speed friction

    Yu.R. Kapral, B.P. Pobereyko, S.M. Dufanets, Yu.V. Divchur, R.O. Kuhar
    125-128
    DOI: https://doi.org/10.36930/42194516

  • The cupping of lumber depending onchangeoftheir moistureand geometric characteristics

    М.V. Udovytska, L.O. Tysovskyj, V.O. Mayevskyy, O.M. Udovytskyi, M.M. Mysyk, O.M. Mayevska
    129-135
    DOI: https://doi.org/10.36930/42194517

  • Forest fires in the Polissiaand their impact on the environment

    P.V. Didenko, V.I. Ustymenko, B. Ya. Bakay
    136-141
    DOI: https://doi.org/10.36930/42194518

  • Features of laser welding of wood-cutting band saws

    I.T. Rebeznyuk, K. Lazarchuk
    142-146
    DOI: https://doi.org/10.36930/42194519

  • Determination of productivity of loading machines of manipulator type in log sort yards

    B.Ya. Bakay, I.M. Rudko, В.O. Mahura
    147-154
    DOI: https://doi.org/10.36930/42194520

  • А study of the influence of the transverse dimensions of beech of strips on the form of stability of furniture board

    T.I. Podibka, O.A. Kiyko
    155-171
    DOI: https://doi.org/10.36930/42194521