The cupping of lumber depending onchangeoftheir moistureand geometric characteristics

М.V. Udovytska; L.O. Tysovskyj; V.O. Mayevskyy; O.M. Udovytskyi; M.M. Mysyk; O.M. Mayevska

doi:10.36930/42194517

Authors

М.V. Udovytska
L.O. Tysovskyj
V.O. Mayevskyy
O.M. Udovytskyi
M.M. Mysyk
O.M. Mayevska

DOI:

https://doi.org/10.36930/42194517

Keywords:

lumber, laminated panel, cupping,shrinkage coefficients, wood moisture, cross section of log.

Abstract

Laminated panels are common among structural elements for the production of a variety of wood products. Most studies of laminated structures are limited to the analysis of their physical and mechanical characteristics. In the case of using laminated panelsas the facade surfaces of joinery and furniture, the importance of their aesthetics is also important. The quality of the laminated structures is conditioned by the properties of its individual sections, so it is important to take into account the properties of these sections for the rational choice of the scheme for the formation of the laminated structure and to predict its quality. The main reasons for the possible change in the shape of the surfaces of the laminated structures are described. Drying and swelling lead to a change in the size and shape of both parts and products of wood and lumber used for their manufacturing. The warpingof lumber is a pronounced defect. The main causes of the lumber warpingare the anisotropy of the properties of the wood and the unevenness of its structure, as well as the uneven change in moisture in different structural directions. The lumber, depending on their location in the log, has unequal resistance to the transverse cup warping. When calculating moisturedeformations, the concept of relative deformation of drying is used. Quantitative characteristics of wood drying are the corresponding coefficients of drying characterizing the change in geometric dimensions. If the drying of the layers of the board is not equal, then such boards will have a transverse cup warping. In order to solve the problem of rational choice of the formation scheme of laminated panel structures and predicting their quality even before gluing, the mathematical model for the theoretical study of the shape change of lumber was developed. Obtained engineering formulas for calculating the coefficients of wood drying show that the form change of lumber depends mainly on its size, moisture and location in the log. To determine the magnitude of the shrinkage coefficients of the lumber layers, it is advisable to use the shrinkagecoefficients in the radial and tangential directions.

References

Ashkenazi E.K. (1978). Anizotropiya drevesiny i drevesnykh materialov [Anisotropy of wood and wood materials]. Forest industry, Moscow, 224, (in Russian).

Dyachun Z.Y. (2007). Konstruyuvannya mebliv: Korpusni vyroby [Furniture design: Cabinet products]. - Kyiv: Kyiv-Mohyla Academy House, part 1, 387, (in Ukrainian).

Dyachun Z.Y. (2011). Konstruyuvannya mebliv: Stoly, stiltsi ta krisla, mebli dlya vidpochynku. Vzayemozaminnist, mitsnist [Furniture design: Tables, chairs and armchairs, leisure furniture. Interchangeability, strength]. - Kyiv: Kyiv-Mohyla Academy House, part 2, (in Ukrainian).

Ferents O.B., Maxsymiv V.M. (2011). Tekhnolohiya stolyarnykh vyrobiv [Technology of carpentry]. – Lviv: UNFU, 400, (in Ukrainian).

Gayda S.V. (2007). Матеріали для виготовлення виробів з деревини / Навч. посібн. – Львів: ВМС. – 160 с. (in Ukrainian).

Gayda S.V. (2007). Проблема деревної сировини у Європі та Україні / Problema derevnoyi syrovyny u Yevropi ta Ukrayini [А problem of arboreal raw material is in Europe and Ukraine]. Forestry, Forest, Paper and Woodworking Industry 33:55-63 (in Ukrainian).

Gayda S.V. (2011). Recycled of post-consumer wood is for the production of particleboard in Ukraine / Proceedings of the XXI International symposium Adhesives in Woodworking Industry (Slovakia, Zvolen Ju-ve 29 – July 01. 2011). TU Zvolen. – P. 108-121.

Gayda S.V. (2013). Techniques for utilization of post-consumer wood in the production of fuel pellets and briquettes. Proceedings of the XXI International symposium Adhesives in Woodworking Industry (Slo-vakia, Zvolen Juve 23-26. 2013). TU Zvolen, 119-130.

Gayda S.V. (2013). Розроблення технології виробництва паливних гранул на основі енергетично-го потенціалу вживаної деревини [Development of technology for the production of fuel pellets based on the energy potential of used wood]. Scientific Bulletin of UNFU 23.14:83-93. (in Ukrainian).

Gayda S.V. (2015). Investigation of physical and mechanical properties of post-consumer wood. Actu-al problems of forest complex 43:175-179, (in Russian).

Gayda S.V. (2015). Моделювання властивостей столярних плит із вживаної деревини на основі методу кінцевих елементів / Modeling properties of blockboards made of post-consumer wood on the basis of the finite element method. Forestry, Forest, Paper and Woodworking Industry 41:39-49. doi: https://doi.org/10.36930/42154106

Gayda S.V. (2016). A form of stability of blockboards made of post-consumer wood. Actual problems of forest complex 46:148-153 (in Russian).

Gayda S.V. (2016). A investigation of form of stability of variously designed blockboards made of post-consumer wood. ProLigno 12(1).22-31.

Gayda S.V. (2016). Formoustoychivost' stolyarnykh plit iz vtorichno ispol'zuemoy drevesin [A form of stability of blockboards made of post-consumer wood]. Actual problems of forest complex 46:148-153, (in Russian).

Gayda S.V. (2016). Research on physical and mechanical characteristics of front blockboards made from post-consumer wood [Дослідження фізико-механічних характеристик фасадних столярних плит із вживаної деревини]. Forestry, Forest, Paper and Woodworking Industry 42: 33-50. doi: https://doi.org/10.36930/42164206

Gayda S.V. (2017). A technology and properties of furniture board made of post-consumer wood. Actual problems of forest complex 48:34-38 (in Russian).

Gayda S.V. (2017). Використання нечітких експертних систем для підтримки прийняття рішень в процесі сортування вживаної деревини / Vykorystannya nechitkykh ekspertnykh system dlya pidtrymky pryynyattya rishenʹ v protsesi sortuvannya vzhyvanoyi derevyny [Using fuzzy expert systems for decision sup-port in the process of post-consumer wood sorting]. Forestry, Forest, Paper and Woodworking Industry 43:5-20 (in Ukrainian). doi: https://doi.org/10.36930/42174301

Gayda S.V. (2017). Комплексні дослідження зміни пружних властивостей вживаної деревини ялиці з віком / Kompleksni doslidzhennya zminy pruzhnykh vlastyvostey vzhyvanoyi derevyny yalytsi z vikom [The complex studies on the change of elastic properties of post-consumer fir wood with age]. Forestry, For-est, Paper and Woodworking Industry 43:58-72 (in Ukrainian). doi: https://doi.org/10.36930/42174308

Gayda S.V. (2018). A investigation and analysis of characteristics of solid furniture boards made of post-consumer wood. Forestry, Forest, Paper and Woodworking Industry, 44, 15-25. https://doi.org/10.36930/42184402 (in Ukrainian).

Gayda S.V. (2018). Shape stability as a quality criterion for PCW-made blockboards. Scientific Works of the Forestry Academy of Sciences of Ukraine 17:185-192 (in Ukrainian).

Gayda S.V. (2018). Strength of combined blockboard made of post-consumer wood (PCW). Bulletin of KhNTUA 197:3-9, (in Ukrainian).

Gayda S.V. (2018). Дослідження та аналіз характеристик щитових конструкцій із вживаної дере-вини / Doslidzhennya ta analiz kharakterystyk shchytovykh konstruktsiy iz vzhyvanoyi derevyny [A investigation and analysis of characteristics of solid furniture boards made of post-consumer wood]. Forestry, Forest, Paper and Woodworking Industry 44:14-24 (in Ukrainian). doi: https://doi.org/10.36930/42184402

Gayda S.V. (2018). Технологія МДФ-фасадів / Tekhnolohiyi MDF-Fasadiv [MDF Facade Technolo-gies]. Forestry, Forest, Paper and Woodworking Industry 44:70-83 (in Ukrainian). doi: https://doi.org/10.36930/42184410

Gayda S.V. (2019). Scientific and technical basis of the use of used wood in woodworking: thesis of the Doctor of Technical Sciences in the specialty 05.23. – Lviv: UNFU. – 465 (in Ukrainian).

Gayda S.V. (2019). Development of constructions and technology of the PCW-made blockboards: proceedings of the Scientific and Technical Conference, KhNTUA: 69-70 (in Ukrainian).

Gayda S.V., Bilyy Ya.M. (2016). The investigation of the shape stability of glued panels made of post-consumer wood. Forestry, Forest, Paper and Woodworking Industry, 42, 69-79. https://doi.org/10.36930/42164211 (in Ukrainian).

Gayda S.V., Dyak T.P. (2011). The analysis of economic efficiency of post-consumer wood use for particleboard manufacture for LLC Swisspan Limited // Forestry, Forest, Paper and Woodworking Industry 37.2:129-136. doi: https://doi.org/10.36930/421137221

Gayda S.V., Kiyko O.A. (2013). Технология очистки вторично используемой древесины иглофре-зерными станками [The technology of cleaning recycled wood with needle milling machines] // Actual prob-lems and prospects of the development of LPK: materials II NTK., September 9-11, 2013 – Kostroma. – P. 36-39. (in Russian).

Gayda S.V., Kiyko O.A. (2018). Shape stability as a quality criterion for PCW-made blockboards. Proceedings of the Forestry Academy of Sciences of Ukraine, 17, 185-192. https://doi.org/10.15421/411834 (in Ukrainian)

Gayda S.V., Maksimiv V.M., Kiyko O.A., Ferenc O.B. (2013). Залишки деревини та деревина після споживання. Класифікація. Терміни та визначення [Wood residues and post-consumer wood. Classifi-cation. Terms and definitions] / Agreement No. 08.24-11-1: draft international standard ISO. – Lviv: NLTU of Ukraine – 53 p. (in Ukrainian).

Gayda S.V. (2013). The technological solutions for recycling of post-consumer wood. Proceedings of I International Interdisciplinary Scientific Conference Formation of stable outlook as the basis of sustaina-ble development (Ukraine, Lviv, 14-16 March 2013) UNFU: Lviv, 5-11.

Hlukhykh V.N. (2002). O vozmozhnoy vzaymosvyazy postoyannykh upruhosty y koéffytsyentov usushky drevesyny [On the possible relationship of constant elasticity and shrinkage coefficients of wood] // Technology and equipment of woodworking industries. Scientific Bulletin of SPb, LTA. 124-128, (in Russian).

Kryvyk O.O., Mayevskyy V.O. (2011). Dynamics of shape stability change for glued panels with a combination of different wood species. Forestry, Forest, Paper and Woodworking Industry, 37(1), 30-33.

Maevskyy V.O. (2014). Osnovni napryamy doslidzhen u vyrobnytstvi kleyenykh shchytovykh konstruktsiy z derevyny iz dotrymannyam teksturnykh osoblyvostey [The main directions of research in the production of glued panel structures made of wood with respect to textural features]. Scientific Bulletin of UNFU 24.5: 150-155 (in Ukrainian).

Mitchell, P. H. (2016). Modeling the Cupping of Lumber. BioResources, 11(3), 6416-6425.

Porter B. (2001). Carpentry and Joinery– Vol. 1, 694.

Sokolov P.V. (1971). Vlyyanye nekotorykh faktorov na sylu koroblenyya drevesyny [Influence of some factors on the force of wood warping]. Moskow: Woodworking industry 3: 8-10, (in Russian).

Uholev B.N. (1950). Vnutrennye napryazhenyya v drevesyne pry ee sushke [Internal stresses in wood during its drying]. Moskow: Goslesbumizdat, 116, (in Russian).

Vintonov I.S. Sopushinsky I.M., Taishinger A. (2007). Derevynoznavstvo [Wood Science]: textbook. way. - Lviv: Apriori, 312, (in Ukrainian).

Wood Handbook (2010). Wood as an Engineering Material. Gen. Tech. Rep. / FPL−GTR−190. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 508.

Xiang, Z., Peralta, P., & Peszlen, I. (2012). Lumber drying stresses and mitigation of cross-sectional deformation. Wood and Fiber Science, 44(1), 94-102.