Вплив зволоження деревинно-волокнистих плит на процес їх гнуття

Ігор Пилипів

doi:10.36930/

Authors

I.Z. Pylypiv Ukrainian National Forestry University

DOI:

https://doi.org/10.36930/

Keywords:

fiberboard, curved elements, thickness of plates, bending, moisture, PVA glue.

Abstract

Analyzed the results of studies the impact moisture on the radius of bending plates different thickness after applying PVA glue on one and two sides with different exposure time. Found that for all thicknesses of both unilateral and bilateral moistening occurs optimal exposure time after applying the adhesive to the bending process. The study allowed us to obtain the minimum values of radius for each thickness of plates at one and two sided moisture.

References

Pylypiv I.Z., Maksymiv V.M. Question to methods bending of wood-fiber boards. Науковий вісник НЛТУ Украї-ни : зб. наук.-техн. праць. – Львів : РВВ НЛТУ України. – 2012. – Вип. 22.14. – 408 с.

Бехта П.А. Технологія деревинних плит і пластиків. – Київ: Основа, 2004. – 780 с.

Шумега С.С. Спеціальна технологія меблевого виробництва. — К. : Вища шк. 1981. – 242 с.

Modern Technology of Wood, Veneer, Plywood, Particle, Board, Fibreboard, Bamboo & Forest – Products Engineers India Research In, 2011. – 536 с.

Gayda S.V. (2000): Матеріали для виготовлення виробів з деревини / Materials for the Productsion of wood Productss. Lviv: BMC. – 160 p. (in Ukr.).

Gayda S.V. Comparative analysis of bending particularities for various post-consumer wood species and age categories // Forestry, Forest, Paper and Woodworking Industry, Lviv: UNFU, 2011, 37.1:84-88. (Ukr).

Gayda S.V., Voronovich V.V. Investigation of the features of bending of post-consumer wood // Proceedings of the Conference, Mari State University, – 2011, 190-192 (in Russian).

Gayda S.V. The effective use of post-consumer wood is basis for diminishing of СО2-emission // Scientific Herald.  Lviv: UNFU.  2009, 19.14:72-89. (in Ukr.).

Gayda, S., Dyak, T. The analysis of economic efficiency of post-consumer wood use for parti-cleboard manufacture for LLC Swisspan Limited // Forestry, Forest, Paper and Woodworking Industry.  Lviv: UNFU.  2011, 37.2:129-136.

Gayda S.V. Research of concentration of operations is in modern furniture Productsion // Forestry, Forest, Paper and Woodworking Industry.  Lviv.  2007, 33:73-79. (in Ukr.).

Gayda, S. The investigation of physical and mechanical properties of wood particleboards made from post-consumer wood // Forestry, Forest, Paper and Woodworking Industry, Lviv: UNFU.  2011, 37.2:95-110.

Gayda S.V., Maksymiv V.M. Analysis, features, problems and experience of the use of additional resources of raw material – wastes and of used wood // Forestry, Forest, Paper and Woodworking Industry.  Lviv: NUFWT of Ukraine.  2007, pub. 33.  P. 63-73. (in Ukr.).

Gayda S.V. А problem of wood raw material is in Europe and Ukraine // Forestry, Forest, Paper and Woodworking Industry.  Lviv: UNFU.  2007, 33:55-63. (in Ukr.).

Gayda S.V. Potential of post-consumer recovered wood and possible ways of it using in Ukraine // Forestry, Forest, Paper and Woodworking Industry.  Lviv.  2009, 35:63-83.

Gayda S.V., Maksymiv V.M., Tunytsya T.Yu. Elaboration of post-consumer wood classifier // For-estry, Forest, Paper and Woodworking Industry.  Lviv.  2008, 34:55-68. (in Ukr.).

Gayda S.V. Chemical compound and degree of its contamination as the basis to systematization of post-consumer wood / Forestry, Forest, Paper and Woodworking Industry, 2008, 34:68-79. (in Ukr.).

Gayda S.V., Maksymiv V.M. From recycled post-consumer wood towards prime quality parti-cleboard // Forestry, Forest, Paper and Woodworking Industry.  Lviv: 2010, 36:57-77.

Gayda S.V. A comparative analysis of physical-and mechanical parameters of variously-designed Glued Boards made of post-consumer Recovered Wood / Forestry, Forest, Paper and Woodworking Industry.  Lviv: UNFU.  2010, 36:81-91.

Gayda S.V. Recovered wood is additional resource of raw material // Forestry, Forest, Paper and Woodworking Industry.  Lviv: UNFU.  2011, 37.1:238-244. (in Ukr.).