Vol. 39 (2013): Forestry, Forest, Paper and Woodworking Industry

View Vol. 39 (2013): Forestry, Forest, Paper and Woodworking Industry

In this Collection of Reaserch Papers the result of studies which are focused on scientific achievements in the field of forestry and silviculture, forest and paper industry.  As well as the results of studies in the field of forest restoration and enrichment of forest resources, and forest protection, ecological problems of the environment and sustainable management of natural resources are analyzed. New aspects of resource-saving and environmentally-friendly of the woodworking and furniture technologies are considered.

The Collection is designed for researchers, faculty members of educational institutions, a wide audience of forestry sector, forest, paper and woodworking industry professionals.

Published: 2013-04-25

Full Issue

Articles

  • Changes in forest ecosystems of the northern megaslope of the Carpathians under the influence of transformation processes

    Ya.V. Henyk, M.V. Chernyavskyy, P.T. Yashchenko
    8-13
    DOI: https://doi.org/10.36930/

  • Forming of rain floods flow from the small Carpathian catchment and its parts with different percentage of forest cover

    N.I. Koziy, I.Ye. Kulchytskyy-Zhyhaylo
    13-19
    DOI: https://doi.org/10.36930/

  • DISTRIBUTION OF HERBACEOUS VEGETATION DEPENDING ON THE BEECH STAND AGE AND CLOSURE IN THE FOREST-PARK ZONE OF THE CITY OF LVIV

    N.V. Pavlyuk
    20-24
    DOI: https://doi.org/10.36930/

  • Research on the influence of equipment reliability on the efficiency of automatic lines operation

    R.Ya. Orikhovskyy
    24-27
    DOI: https://doi.org/10.36930/

  • The current state and structure of denrological flora in the Raivskyy park and ways of its enrichment

    V.Ya. Zayachuk, S.І. Semkiv
    27-33
    DOI: https://doi.org/10.36930/

  • A method for evaluating the production potential of load-haul machines of manipulator type under conditions of timber yard

    B.Ya. Bakay
    34-39
    DOI: https://doi.org/10.36930/

  • Morpho-anatomical parameters of scots pine needles in pine forest of Small Polisya

    A.V. Rudenko, V.K. Zaika
    39-43
    DOI: https://doi.org/10.36930/

  • Indicators of recreational properties of ukrainian roztochya forests

    V.Ye. Lutsyshyn
    44-47
    DOI: https://doi.org/10.36930/

  • Technologies and recommendations on the utilization of post-consumer wood in woodworking industry

    S.V. Gayda
    48-67
    DOI: https://doi.org/10.36930/42133909

  • Determination of method for drying straw particles in the manufacture of particleboards

    R.O. Kozak
    67-71
    DOI: https://doi.org/10.36930/

  • To the question of shape stability of panel blanks

    Ya.M. Bilyy, S.A. Grytsak
    88-89
    DOI: https://doi.org/10.36930/

  • Experimental determination of fiber saturation point for beech thermowood

    Yu.M. Huber, M.M. Ilkiv
    89-92
    DOI: https://doi.org/10.36930/

  • Peculiarities of production technology for fuel pellets from chipped softwoods

    R.Y. Saldan, I.V. Vakulin
    93-95
    DOI: https://doi.org/10.36930/

  • The analysis of drying technology at the Novograd-Volynske DLMG enterprise

    V.V. Boryachynskyy, O.O. Pinchevska
    100-103
    DOI: https://doi.org/10.36930/

  • Creating a website "Custom-made furniture products"

    V.S. Gayda
    104-110
    DOI: https://doi.org/10.36930/

  • The study of various factors influence on the protective coatings and decorative properties of kitchen furniture

    Ya.M. Bilyy, S.A. Grytsak
    111-112
    DOI: https://doi.org/10.36930/

  • Definition of the role of wood and wood-based materials in furniture production, based on the sociological survey

    I.O. Kiyko
    113-116
    DOI: https://doi.org/10.36930/

  • The problem of the organization of space-substantive environment of the suburban residential recreational facilities

    R.R. Tushnitska
    117-119
    DOI: https://doi.org/10.36930/

  • Analysis of structural characteristics of circular saws for ripping round timber

    M.O. Bіletskyy, Z.S. Sіrko
    120-122
    DOI: https://doi.org/10.36930/

  • Analysis of wood waste and ways of the use of thin-sized wood material

    O.S. Malakhova, Yu.P. Lakyda
    122-125
    DOI: https://doi.org/10.36930/

  • Results of experimental studies of the density of pine-wood

    P.V. Biley, R.O. Rokun
    125-129
    DOI: https://doi.org/10.36930/

  • The methodology of study on primary moisture-heat treatment of sawn timber prior to drying

    A.M. Kombarov, P.P. Biley
    131-134
    DOI: https://doi.org/10.36930/

  • Computer-aided design and research of drying chambers by means of SolidWorks API and Flow Simulation

    P.I. Rozak
    136-141
    DOI: https://doi.org/10.36930/

  • Research on physical-and-mechanical properties of coatings based on the modified linseed oil

    L.V. Khmaryk
    141-144
    DOI: https://doi.org/10.36930/

  • Theoretical aspects of determination of environmental-and-economic effectiveness of complex utilization of wood

    O.O. Ferents, R.Ya. Kindrat
    147-150
    DOI: https://doi.org/10.36930/

  • MODELING AND SIMULATION OF HEAT-AND-MASS TRANSFER IN WOOD DURING THERMAL TREATMENT IN СО2 ENVIRONMENT

    Yo.V. Andrashek, R.B. Shchupakivskyy, O.V. Kryvko
    157-161
    DOI: https://doi.org/10.36930/

  • The study on shape stability of panel blanks in the process of lamination

    Ya.M. Bilyy, S.A. Grytsak
    164-166
    DOI: https://doi.org/10.36930/

  • Sensory rooms: aspects of the design and application

    K.A. Labunska, R.M. Kupchyk
    178-181
    DOI: https://doi.org/10.36930/

  • Modern technologies for efficient use of wood in the sawmill industry

    O.B. Ferentc, R.Ya. Kindrat , O.O. Ferents
    227-230
    DOI: https://doi.org/10.36930/