Analysis of structures and technologies of manufacture of modern furniture facades

S.V. Gayda

doi:10.36930/42204606

Authors

S.V. Gayda

DOI:

https://doi.org/10.36930/42204606

Keywords:

furniture board, furniture facade, technologies, frame and tahl constructions, wood products, production, cabinet furniture.

Abstract

The analysis of a condition of a question is made the modern furniture facades are analyzed. Structural components for creation of furniture facades of the accepted designs are analyzed. Designs of furniture facades for research have been developed. Modern materials for the creation of four variants of furniture facades of modern constructions for comparative research have been selected and calculated. The method of comparative research of technological processes of obtaining furniture facades with different components and components is carried out and presented. Technological operations during creation of furniture facades of modern designs of the accepted variant of researches are described. Modern equipment for technological operations during the creation of furniture facades of modern structures according to research methods has been selected. The equipment was calculated and its cost analysis was made to create each of the four options for furniture facades. Production staff was selected and the number was analyzed to create four variants of furniture facades of modern structures for each developed technology. The comparative analysis of technological processes on the basic indicators is made. Nomograms of costs for the operation of each technology are constructed. Indicators of partial economic efficiency for all variants of furniture facades of modern constructions are calculated and the rational variant of manufacturing of a facade from a furniture board is chosen. It is determined that the highest value of economic efficiency EE2 – the second option of investment costs, ie that the option of manufacturing door furniture facades from furniture panels is the most cost-effective – effective for implementation in production, as it has the lowest partial cost-effectiveness 1 , 76 compared to other options.

References

Dyachun Z.J. (2007). Konstruyuvannya mebliv: Korpusni vyroby (Furniture design: Cabinet prod-ucts). – Kyiv: Mohyla Academy House, 387 p. (in Ukrainian).

Gayda S.V. (1998). Основи створення гнучких автоматизованих виробництв [Basics of creating flexible automated production]. – Lviv. – 149 p. (in Ukrainian).

Gayda S.V. (1999). Проблеми та перспективи роботизації меблевої промисловості [Problems and prospects of robotics in the furniture industry]. Scientific Bulletin of UNFU 9.5:192-195. (in Ukrainian).

Gayda S.V. (2000). Визначення стійкості та міцності вертикальних стінок корпусних меблевих ви-робів [Determination of stability and strength of vertical walls of case furniture products]. Scientific Bulletin of UNFU 10.3:127-129. (in Ukrainian).

Gayda S.V. (2000). Матеріали для виготовлення виробів з деревини / Materialy dlya vyhotovlennya vyrobiv z derevyny / Materials for the Productsion of wood Productss. – Lviv: BMC. – 160 p., (in Ukrainian).

Gayda S.V. (2000). Особливості розрахунку корпусних виробів на міцність [Peculiarities of strength calculation of hull products]. Scientific Bulletin of UNFU 10.2:150-154. (in Ukrainian).

Gayda S.V. (2001). Раціональне конструювання виробів з деревини / Rational constructing of wood Productss. Lviv: BMC. – 93 p., (in Ukrainian).

Gayda S.V. (2002). Особливості та перспективи роботизації меблевої промисловості України [Peculiarities and prospects of robotization of the furniture industry of Ukraine]. Scientific Bulletin of UNFU 12.5:38-40. (in Ukrainian).

Gayda S.V. (2003). Гнучкі виробничі модулі для виготовлення ґратчастих меблевих виробів [Flexible production modules for the production of lattice furniture products]. Scientific Bulletin of UNFU 13.2:120-122. (in Ukrainian).

Gayda S.V. (2004). Інтегровані технології меблевого виробництва [Integrated technologies of furni-ture production]. Scientific Bulletin of UNFU 14.4:118-121. (in Ukrainian).

Gayda S.V. (2007). Дослідження концентрації операцій у сучасному меблевому виробництві / Doslidzhennya kontsentratsiyi operatsiy u suchasnomu meblevomu vyrobnytstvi [Research of concentration of operations is in modern furniture Productsion]. Forestry, Forest, Paper and Woodworking Industry 33:73-79 (in Ukrainian).

Gayda S.V. (2007). Проблема деревної сировини у Європі та Україні / Problema derevnoyi syrovyny u Yevropi ta Ukrayini [А problem of arboreal raw material is in Europe and Ukraine]. Forestry, Forest, Paper and Woodworking Industry 33:55-63 (in Ukrainian).

Gayda S.V. (2011). Вживана деревина – додатковий ресурс сировини / Vzhyvana derevyna – dodat-kovyy resurs syrovyny [Recovered wood is additional resource of raw material]. Forestry, Forest, Paper and Woodworking Industry 37(1). 238-244 (in Ukrainian).

Gayda S.V. (2013). The technological solutions for recycling of post-consumer wood. Proceedings of I International Interdisciplinary Scientific Conference Formation of stable outlook as the basis of sustainable development (Ukraine, Lviv, 14-16 March 2013) UNFU: Lviv, 5-11.

Gayda S.V. (2013). Основи формування класифікатора вторинних деревинних ресурсів / Osnovy formuvannya klasyfikatora vtorynnykh derevynnykh resursiv [Bases of secondary wood resources classifier for-mation]. Scientific Works of the Forestry Academy of Sciences of Ukraine 11:208-215 (in Ukrainian).

Gayda S.V. (2013). Розроблення технології виробництва паливних гранул на основі енергетичного потенціалу вживаної деревини [Development of technology for the production of fuel pellets based on the energy potential of used wood]. Scientific Bulletin of UNFU 23.14:83-93. (in Ukrainian).

Gayda S.V. (2013). Технології та рекомендації до використання вживаної деревини в деревооброб-ленні / Resursooshchadnі tekhnologії pereroblennya vzhivanoї derevini [Resource-saving technologies of recy-cling of post-consumer wood]. Scientific Bulletin of NULES of Ukraine: Technology and Energy of agroindus-trial complex 185(2).271-280, (in Ukrainian).

Gayda S.V. (2014). Sposoby podgotovki k pererabotke vtorichno ispol'zuyemoy drevesiny iglofrezernymi i shchotochnymi stankami [Preparation methods for processing of post-consumer wood (PCW) needle-milling and brushing machines]. Actual problems of forest complex 40:65-69 (in Russian).

Gayda S.V. (2015). Investigation of physical and mechanical properties of post-consumer wood. Actual problems of forest complex 43:175-179, (in Russian).

Gayda S.V. (2015). Tekhnologії і fіziko-mekhanіchnі vlastivostі stolyarnikh plit іz vzhivanoї derevini (Technology and physical and mechanical properties blockboard made of post-consumer wood). Technical ser-vice of agriculture, forestry and transport systems 3(1).145-152, (in Ukrainian).

Gayda S.V. (2016). A investigation of form of stability of variously designed blockboards made of post-consumer wood. ProLigno 12(1).22-31.

Gayda S.V. (2016). Ekologo-tekhnologicheskiye aspekty pererabotki vtorichno ispol'zuyemoy drevesiny dlya proizvodstva pressovannykh materialov (Ecological and technological aspects of recycling post-consumer wood for production compacted materials). Lesnoy vestnik / Forestry bulletin of MSFU 20(3).15-22 (in Rus-sian).

Gayda S.V. (2016). Formoustoychivost' stolyarnykh plit iz vtorichno ispol'zuemoy drevesin [A form of stability of blockboards made of post-consumer wood]. Actual problems of forest complex 46:148-153, (in Russian).

Gayda S.V. (2017). Tekhnologiya i svoystva mebel'nogo shchita iz vtorichno ispol'zuemoy drevesiny (A technology and properties of furniture board made of post-consumer wood). Actual problems of forest complex 48:34-38, (in Russian).

Gayda S.V. (2017). Використання нечітких експертних систем для підтримки прийняття рішень в процесі сортування вживаної деревини / Vykorystannya nechitkykh ekspertnykh system dlya pidtrymky pryynyattya rishenʹ v protsesi sortuvannya vzhyvanoyi derevyny [Using fuzzy expert systems for decision sup-port in the process of post-consumer wood sorting]. Forestry, Forest, Paper and Woodworking Industry 43:5-20 (in Ukrainian). doi: https://doi.org/10.36930/42174301

Gayda S.V. (2017). Комплексні дослідження зміни пружних властивостей вживаної деревини ялиці з віком / Kompleksni doslidzhennya zminy pruzhnykh vlastyvostey vzhyvanoyi derevyny yalytsi z vikom [The complex studies on the change of elastic properties of post-consumer fir wood with age]. Forestry, Forest, Pa-per and Woodworking Industry 43:58-72 (in Ukrainian). doi: https://doi.org/10.36930/42174308

Gayda S.V. (2018). Strength of combined blockboard made of post-consumer wood (PCW). Bulletin of KhNTUA 197:3-9, (in Ukrainian).

Gayda S.V. (2018). Дослідження та аналіз характеристик щитових конструкцій із вживаної дереви-ни / Doslidzhennya ta analiz kharakterystyk shchytovykh konstruktsiy iz vzhyvanoyi derevyny [A investigation and analysis of characteristics of solid furniture boards made of post-consumer wood]. Forestry, Forest, Paper and Woodworking Industry 44:14-24 (in Ukrainian). doi: https://doi.org/10.36930/42184402

Gayda S.V. (2018). Технологія МДФ-фасадів / Tekhnolohiyi MDF-Fasadiv [MDF Facade Technolo-gies]. Forestry, Forest, Paper and Woodworking Industry 44:70-83 (in Ukrainian). doi: https://doi.org/10.36930/42184410

Gayda S.V. (2019). Scientific and technical basis of the use of used wood in woodworking: thesis of the Doctor of Technical Sciences in the specialty 05.23. – Lviv: UNFU. – 465 (in Ukrainian).

Gayda S.V. (2019). Визначення та порівняння властивостей вживаної деревини основних хвойних порід / Vyznachennya ta porivnyannya vlastyvostey vzhyvanoyi derevyny osnovnykh khvoynykh porid [A deter-mination and comparison of properties of post-consumer wood of the basic conifers]. Forestry, Forest, Paper and Woodworking Industry 45:38-49 (in Ukrainian). doi: https://doi.org/10.36930/42194506

Gayda S.V., Bilyy Ya.M. (2019). Дослідження технологічних процесів виготовлення ліжок двоспа-льних різних конструкцій / Doslidzhennya tekhnolohichnykh protsesiv vyhotovlennya lizhok dvospalʹnykh riznykh konstruktsiy [A investigation of technological processes of making beds of double different designs]. Forestry, Forest, Paper and Woodworking Industry 45:21-31 (in Ukrainian). doi: https://doi.org/10.36930/42194504

Gayda S.V., Kiyko O.A. (2013). Технология очистки вторично используемой древесины иглофре-зерными станками [The technology of cleaning recycled wood with needle milling machines] // Actual prob-lems and prospects of the development of LPK: materials II NTK., September 9-11, 2013 – Kostroma. – P. 36-39. (in Russian).

Gayda S.V., Kiyko O.A. (2018). Shape stability as a quality criterion for PCW-made blockboards. Pro-ceedings of the Forestry Academy of Sciences of Ukraine, 17, 185-192. https://doi.org/10.15421/411834 (in Ukrainian)

Gayda S.V., Kiyko O.A. (2020). Determining the regime parameters for the surface cleaning of post-consumer wood by a needle milling tool. Eastern-European Journal of Enterprise Technologies, 5 (1 (107)), 89–97. doi: https://doi.org/10.15587/1729-4061.2020.212484.

Gayda S.V., Kiyko O.A. (2020). The investigation of properties of blockboards made of post-consumer wood. Poznan : Drewno, 63 (206), 77-102. doi: https://doi.org/10.12841/wood.1644-3985.352.10.

Gayda S.V., Kshyvetskyy B.Ya. (1999). Техніко-економічні характеристики деревообробної фабри-ки майбутнього [Technical and economic characteristics of the woodworking factory of the future]. Scientific Bulletin of UNFU 9.3:83-85. (in Ukrainian).

Gayda S.V., Lesiv L.E. (2019). Визначення та порівняння властивостей вживаної деревини основ-них хвойних порід / Vyznachennya ta porivnyannya vlastyvostey vzhyvanoyi derevyny osnovnykh khvoynykh porid [A determination and comparison of properties of post-consumer wood of the basic conifers]. Forestry, Forest, Paper and Woodworking Industry 45:39-46 (in Ukrainian). doi: https://doi.org/10.36930/42194506

Gayda S.V., Maksimiv V.M., Kiyko O.A., Ferenc O.B. (2013). Залишки деревини та деревина після споживання. Класифікація. Терміни та визначення [Wood residues and post-consumer wood. Classification. Terms and definitions] / Agreement No. 08.24-11-1: draft international standard ISO. – Lviv: NLTU of Ukraine – 53 p. (in Ukrainian).

Gayda S.V., Maksymiv V.M. (2007). Аналіз, особливості, проблеми та досвід використання додат-кових ресурсів сировини – відходів та вживаної деревини / Analiz, osoblyvosti, problemy ta dosvid vy-korystannya dodatkovykh resursiv syrovyny – vidkhodiv ta vzhyvanoyi derevyny [Analysis, features, problems and experience of the use of additional resources of raw material – wastes and of used wood]. Forestry, Forest, Paper and Woodworking Industry 33:63-73 (in Ukrainian).

Gayda S.V., Nikityuk L.O. (1998). До питання застосування екстрагованої деревини для плитного виробництв [On the issue of using extracted wood for slab production]. Scientific Bulletin of UNFU 8:75-77. (in Ukrainian).

Gayda S.V., Voronovich V.V. (2011). Investigation of the features of bending of post-consumer wood // Proceedings of the Conference, Mari State University. – 190-192 (in Russian).

Gayda S.V., Voytovych I.G. (2017). Дослідження міцності та стійкості елементів ґратчастих мебле-вих виробів із вживаної деревини / Doslidzhennya mitsnosti ta stiykosti elementiv gratchastykh meblevykh vy-robiv iz vzhyvanoyi derevyny [Durability and stability of elements for beam furniture products made from post-consumer wood are investigated]. Bulletin of KhNTUA 189:62-70 (in Ukrainian).

Gayda S.V., Ya.M. Bilyy (2016). Doslidzhennya formostiykosti kleyenykh shchytiv iz vzhyvanoyi derevyny [The investigation of the shape stability of glued panels made of post-consumer wood]. Forestry, Forest, Paper and Woodworking Industry 42: 69-79 (in Ukrainian). doi: https://doi.org/10.36930/42164211

Voytovych I.G. (2010). Osnovi tekhnologії virobіv z derevini [The basic technology of wood]. – Textbook. –Lviv: Kraine andeljat. – 304 p. (in Ukrainian).

Zayats I.M. (1995). Tekhnolohiya vyrobiv z derevyny (Technology of wood products). Kyiv, 1995. – 265 p. (in Ukrainian).