Systematization of wood waste - the basis of their effective use

L.V. Medvid

doi:10.36930/42184412

Authors

L.V. Medvid

DOI:

https://doi.org/10.36930/42184412

Keywords:

wood waste, wood residues, post-consumer wood, systematization, classification, processing, use.

Abstract

Based on the results of a detailed analysis of literature sources, it was established that the industrial use of additional wood reserves is not only a significant increase in the raw material base for the woodworking industry, but will also become a necessity for environmental and economic reasons in the near future. After studying the state of the issue, the systematization of wood waste by origin as an additional raw material for processing in the woodworking industry was developed and proposed. It was found that potential sources of additional raw materials can be: logging waste (stumps and roots, knots and branches, tops and cuttings, thin-sized and substandard trees); post-production waste (sawdust and shavings, bars and slats, saws and burrs, trimmings and sawdust, grinding powder and screenings); post-consumer wood (PCW). The areas of suitability for the use of waste in certain industries are substantiated and proposed, as well as grouped by their qualitative characteristics for effective use. The main trends in the use of wood waste are outlined. It has been found that the issue of using used wood in Ukraine can be solved by solving three main problems: Technical and technological study of the suitability of individual wooden products and used wood for their repeated use as technological raw materials for wooden boards or as energy fuel. Equipment and technology for processing used wood and bringing it to the state required by plate manufacturers or the energy industry (power industry). Introduction of appropriate legislation in the field of management of wood waste and used wood products. Measures and ways, a concept and a strategy of using additional wood resources, which will ensure the efficiency of material or energy use, have been developed and proposed.

References

AltholzV: (2003). «Verordnung über Anforderungen an die Verwertung und Beseitigung von AltholzV», Art. 1a der Verordnung vom 1. März 2003. BGBl. I. – Р. 3302-3317.

Bekhta P.A. , Onisko V., Mateyak M., Kuehne G., Dobrovolska E., Shvachyna I. (1999). Перспективи повторного використання вживаної деревини / Perspektyvy povtornoho vykorystannya vzhyvanoyi derevyny [Prospects of reuse of used wood] Scientific Bulletin of the UNFU 9.5:34-45.

Bemmann A., Grosse W., Franke B. (1997). Energetische Nutzung von Holz im Freistaat Sachsen. Fundacja Rozwoj SGGW, Warszawa, s. 195-221.

Brandstätter M. (1994). Rest-und Altholz; Anfall und Vermertung in osterreich. Holzforschung und Holzverwertung, No 3, s. 46-48.

COST Action E31. (2007). National summary reports on the European market of recovered wood (2002-2007). – 335 p.

Deppe H-J. (1989). Industrierestholz-und Altholzrecykling bei der Holzwerkstofferzeugung. HK Holz-und Kunststoffverarbeitung, No 11, s. 272-277

EUWood. (2010). Methodology report. Hamburg / Germany. – 165 p.

Ferens P. (1996). Drewno odpadowe a przemysl plyt drewnopochodny Przemysl, 12, s. 30-33.

Gayda S.V. (2009). Potential of post-consumer recovered wood and possible ways of it using in Ukraine // Forestry, Forest, Paper and Woodworking Industry 35:63-83.

Gayda S.V. (2009). The effective use of post-consumer wood is basis for diminishing of СО2-emission // Scientific Herald.  Lviv: UNFU, 19(14).72-89. (in Ukr.).

Gayda S.V. (2011). Recycled of post-consumer wood is for the production of particleboard in Ukraine / Proceedings of the XXI International symposium Adhesives in Woodworking Industry (Slovakia, Zvolen Juve 29 – July 01. 2011). TU Zvolen. – P. 108-121.

Gayda S.V. (2011). Вживана деревина – додатковий ресурс сировини / Vzhyvana derevyna – dodat-kovyy resurs syrovyny [Recovered wood is additional resource of raw material]. Forestry, Forest, Paper and Woodworking Industry 37(1). 238-244 (in Ukrainian).

Gayda S.V. (2012). Production techniques and properties of fuel pellets produced from post-consumer wood. Forestry, Forest, Paper and Woodworking Industry 38: 112-150.

Gayda S.V. (2013). Techniques for utilization of post-consumer wood in the production of fuel pellets and briquettes. Proceedings of the XXI International symposium Adhesives in Woodworking Industry (Slo-vakia, Zvolen Juve 23-26. 2013). TU Zvolen, 119-130.

Gayda S.V. (2013). Technologies and recommendations on the utilization of post-consumer wood in woodworking industry. Forestry, Forest, Paper and Woodworking Industry 39(1).48-67 (in Ukrainian).

Gayda S.V. (2013). The technological solutions for recycling of post-consumer wood. Proceedings of I International Interdisciplinary Scientific Conference Formation of stable outlook as the basis of sustainable development (Ukraine, Lviv, 14-16 March 2013) UNFU: Lviv, 5-11.

Gayda S.V. (2013). Основи формування класифікатора вторинних деревинних ресурсів / Osnovy formuvannya klasyfikatora vtorynnykh derevynnykh resursiv [Bases of secondary wood resources classifier for-mation]. Scientific Works of the Forestry Academy of Sciences of Ukraine 11:208-215 (in Ukrainian).

Gayda S.V. (2013). Розроблення технології виробництва паливних гранул на основі енергетичного потенціалу вживаної деревини [Development of technology for the production of fuel pellets based on the energy potential of used wood]. Scientific Bulletin of UNFU 23.14:83-93. (in Ukrainian).

Gayda S.V. (2014). Techniques for recycled of post-consumer wood in the production of quality parti-cleboard. Forestry, Forest, Paper and Woodworking Industry 40:41-51.

Gayda S.V. (2015). Investigation of physical and mechanical properties of post-consumer wood. Actual problems of forest complex 43:175-179, (in Russian).

Gayda S.V. (2016). Ekologo-tekhnologicheskiye aspekty pererabotki vtorichno ispol'zuyemoy drevesiny dlya proizvodstva pressovannykh materialov [Ecological and technological aspects of recycling post-consumer wood for production compacted materials]. Lesnoy vestnik / Forestry bulletin of MSFU 20(3).15-22 (in Rus-sian).

Gayda S.V. (2016). Formoustoychivost' stolyarnykh plit iz vtorichno ispol'zuemoy drevesin [A form of stability of blockboards made of post-consumer wood]. Actual problems of forest complex 46:148-153, (in Russian).

Gayda S.V. (2016). Research on physical and mechanical characteristics of front blockboards made from post-consumer wood [Дослідження фізико-механічних характеристик фасадних столярних плит із вживаної деревини]. Forestry, Forest, Paper and Woodworking Industry 42: 33-50.

Gayda S.V. (2016). Технологічні підходи до поверхневого очищення вживаної деревини голкофрезерним інструментом / Tekhnolohichni pidkhody do poverkhnevoho ochyshchennya vzhyvanoyi derevyny holkofrezernym instrumentom [Technological approaches to cleaning of surface of post-consumer wood of needle-milling tools]. Bulletin of KhNTUA 178:3-11(in Ukrainian).

Gayda S.V. (2017). Tekhnologiya i svoystva mebel'nogo shchita iz vtorichno ispol'zuemoy drevesiny [A technology and properties of furniture board made of post-consumer wood]. Actual problems of forest complex 48:34-38, (in Russian).

Gayda S.V. (2017). Використання нечітких експертних систем для підтримки прийняття рішень в процесі сортування вживаної деревини / Vykorystannya nechitkykh ekspertnykh system dlya pidtrymky pryynyattya rishenʹ v protsesi sortuvannya vzhyvanoyi derevyny [Using fuzzy expert systems for decision sup-port in the process of post-consumer wood sorting]. Forestry, Forest, Paper and Woodworking Industry 43:5-20 (in Ukrainian). doi: https://doi.org/10.36930/42174301

Gayda S.V. (2017). Комплексні дослідження зміни пружних властивостей вживаної деревини ялиці з віком / Kompleksni doslidzhennya zminy pruzhnykh vlastyvostey vzhyvanoyi derevyny yalytsi z vikom [The complex studies on the change of elastic properties of post-consumer fir wood with age]. Forestry, Forest, Pa-per and Woodworking Industry 43:58-72 (in Ukrainian). doi: https://doi.org/10.36930/42174308

Gayda S.V., Bilyy Ya.M. (2016). The investigation of the shape stability of glued panels made of post-consumer wood. Forestry, Forest, Paper and Woodworking Industry, 42, 69-79. https://doi.org/10.36930/42164211 (in Ukrainian).

Gayda S.V., Kiyko O.A. (2013). Технология очистки вторично используемой древесины иглофрезерными станками [The technology of cleaning recycled wood with needle milling machines] // Actual prob-lems and prospects of the development of LPK: materials II NTK., Sept. 9-11, 2013 – Kostroma. – P. 36-39.

Gayda S.V., Maksimiv V.M., Kiyko O.A., Ferenc O.B. (2013). Залишки деревини та деревина після споживання. Класифікація. Терміни та визначення [Wood residues and post-consumer wood. Classification. Terms and definitions] / Agreement No. 08.24-11-1: draft international standard ISO. – Lviv: NLTU of Ukraine – 53 p. (in Ukrainian).

Gayda S.V., Voronovich V.V. (2011). Porіvnyal'niy analіz gnuttya vzhivanoї derevini rіznikh porіd ta vіkovikh kategorіy [Comparative analysis of bending particularities for various post-consumer wood species and age categories]. Forestry, Forest, Paper and Woodworking Industry 37(1). 84-88 (in Ukrainian).

Gayda S.V., Voytovych I.G. (2017). Durability and stability of elements for beam furniture products made from post-consumer wood are investigated. Bulletin of KhNTUA, 189, 62-70 (in Ukrainian).

Gayda, S.V. (2007). Проблема деревної сировини у Європі та Україні / Problema derevnoyi syrovyny u Yevropi ta Ukrayini [А problem of arboreal raw material is in Europe and Ukraine]. Forestry, Forest, Paper and Woodworking Industry 33:55-63 (in Ukrainian).

Gayda, S.V., Maksymiv, V.M. (2007). Аналіз, особливості, проблеми та досвід використання додаткових ресурсів сировини – відходів та вживаної деревини / Analiz, osoblyvosti, problemy ta dosvid vykorystannya dodatkovykh resursiv syrovyny – vidkhodiv ta vzhyvanoyi derevyny [Analysis, features, problems and experience of the use of additional resources of raw material – wastes and of used wood]. Forestry, Forest, Paper and Woodworking Industry 33:63-73 (in Ukrainian).

Hoffmann V. (1996). Zuordnungskriterien fur Rest-und Altholz zur energetischen Verwertung oder thermischen Behandlung. Alt-und Restholz. VDI Verlag GmbH, Dusseldorf, s. 14-24 .

Holzschutzmittelerkennung als Problem der Rest-und Altholzverwertung. Hols-Zentralblatt, Nr.122, s. 951-952 .

Kempa E.S.(1996). Unieszkodliwianie odpadow przemyslowych w wietle dyrektyw Unii Europejskiej. W:"Odpady przemyslowe". Materialy z III Seminarium Szkoleniowego, Poznan.

Maksymiv L.I., Zagvoyska L.I., Klimovych V.P. (2009). Використання енергетичного потенціалу деревини: еколого-економічний вимір / Vykorystannya enerhetychnoho potentsialu derevyny: ekoloho-ekonomichnyy vymir [Using the energy potential of wood: an ecological and economic dimension]. Scientific Works of the Forestry Academy of Sciences of Ukraine 14:244-251 (in Ukrainian).

Marutzky R. (1996). Qualitatsanforderungen und Entsorgungswege fur Rest-und Gebrauchtholzer. Alt-und Restholz. VDI Verlag GmbH, Dusseldorf, s. 25-46.

Michanickl A.(1996). The Material Utilization of Products Made from Wood-Based Panels. Proceedings: New Challenges for the Wood-Based Panels Industry: Technology, Productivity and Ecology. Braunschweig..

Nikyshov V.D. (1985). Комплексное использование древесины / Kompleksnoye ispol'zovaniye drevesiny [Complex use of wood]. Timber industry. – 264 p. (in Russian)/

Onisko W., Dobrowolska E. (1997). Odpady drewne w Polsce. Przemysl Drzewny, 12, s. 5-7.

Prokopovych B.V., Gayda S.V., Kshyvetskyy B.Ya., Voytovych I.G. (2002). Тлумачний словник з деревооброблення / Tlumachnyy slovnyk z derevoobroblennya [Explanatory dictionary from Woodworking]. Lviv: UNFU. – 280 p. (in Ukrainian)

Ratajczak E. (2003). Zasoby odpadow drzewnych w Polsce / E. Ratajczak, A Szostak. Poznan: Czysta Energia,– Vol. 6. – P. 122-125.

Rozhenko V., Balabuha S., Rozhenko I., Dzyma M. (2012). Біомаса – ресурс землі / Biomasa – resurs zemli [Biomass – a land resource]. Proposal 1:98-101 (in Ukrainian).

Sirko Z.S. (2014). Розрахунок обсягів деревинних відходів, які утворюються у виробництві під час перероблення деревини / Rozrakhunok obsyahiv derevynnykh vidkhodiv, yaki utvoryuyutʹsya u vyrobnytstvi pid chas pereroblennya derevyny [Calculation of the amount of wood waste generated in production during wood processing] Scientific Bulletin of the National University of Bioresources and Nature Management of Ukraine 198.1: 215-220.

Urbanik E. (1995). Ekologiczne aspekty utylizacji odpadow drzewnych i zuzytych mebli. Mat. szkoleniowo-promocyjne z seminarium w Zakopanem 5-11.10.1994, Poznan .

Voytovych I.G. (2010). Основи технології виробів з деревини / Osnovy tekhnolohiyi vyrobiv z derevyny [Fundamentals of wood products technology]. – Lviv: Country of Angels, 305 p. (in Ukrainian).

Wroblewska H., Cichy W. (1997). Przemyslowe odpady drzewne powstawanie i wykorzystanie. Przemysl drzewny, No 3., s.32-34.

Кебич М. С., Зильберглейт М. А., Горбатенко И. В., Богуш В. Д. (1995) Применение малоиспользуемых отходов древесины в производстве органоминерального компонента. Деревообр. про-сть, № 3. - с. 8-10.