The investigation of the shape stability of glued panels made of post-consumer wood
DOI:
https://doi.org/10.36930/42164211Keywords:
post-consumer wood, shape stability, PCW-made blockboard, PCW-made furniture panels, glued panels, technology.Abstract
It has been established that in order to streamline the use of forest resources in Ukraine it is necessary to accelerate the adoption of laws on resource conservation and the use of secondary waste. These laws should effectively target enterprises to the ecological and rational consumption of resources, and hence to the development and application of low-waste and non-waste technologies, resource-saving and reliable technology. To do this, the laws must provide for measures of economic responsibility for the irrational use of resources, and for the destruction of business waste - fines. PCW (Post-Consumer Wood) is an additional resource suitable for material use, in particular in the production of panel elements. It was investigated that the shape stability of the combined PCW-made blockboards and the combined PCW-made furniture panels with the use of rails in the width of 20-40 mm, meets the requirements of the standard. The shape stability of the combined PCW-made blockboards is higher than the the combined PCW-made furniture panels for identical structures, in particular the assembly elements - rails. It has been established that in order to provide enterprises with PCW, it is possible, in addition to ordinary panel elements, to make combined ones. It is recommended to use rails of small widths up to 40 mm to increase the shape stability of shield assembly units.
References
Gayda S.V. (2016): A investigation of form of stability of variously designed blockboards made of post-consumer wood. ProLigno 12(1):22-31.
Gayda S.V. (2016): Ekologo-tekhnologicheskiye aspekty pererabotki vtorichno ispol'zuyemoy drevesiny dlya proizvodstva pressovannykh materialov [Ecological and technological aspects of re-cycling post-consumer wood for production compacted materials]. Lesnoy vestnik / Forestry bulletin of MSFU 20(3):15-22 (in Russian).
Gayda S.V. (2016): Formoustoychivost' stolyarnykh plit iz vtorichno ispol'zuemoy drevesin [A form of stability of blockboards made of post-consumer wood]. Actual problems of forest complex 46:148-153, (in Russian).
Gayda S.V. (2015): Issledovanie fiziko-mekhanicheskikh svoystv vtorichno ispol'zuemoy drevesiny [Investigation of physical and mechanical properties of post-consumer wood]. Actual prob-lems of forest complex 43:175-179, (in Russian).
Gayda S.V. (2015): Tekhnologії і fіziko-mekhanіchnі vlastivostі stolyarnikh plit іz vzhivanoї derevini [Technology and physical and mechanical properties blockboard made of post-consumer wood]. Technical service of agriculture, forestry and transport systems 3(1):145-152, (in Ukrainian).
Gayda S.V. (2015): Tekhnologicheskie osnovy pererabotki vtorichno ispol'zuemoy drevesiny [Techno-logical of processing basics of post-consumer wood]. Actual directions of Scientific Research XXI century: Theory and Practice, Voronezh State Forestry Engineering University Named after G.F. Morozov 3(8-2 (19-2)): 82-86, (in Russian).
Gayda S.V. (2016), Research on physical and mechanical characteristics of front blockboards made from post-consumer wood. Forestry, Forest, Paper and Woodworking Industry, 42, 33-50. https://doi.org/10.36930/42164206
Gayda S.V. (2015), Modeling properties of blockboards made of post-consumer wood on the basis of the finite element method. Forestry, Forest, Paper and Woodworking Industry, 41, 39-49. https://doi.org/10.36930/42154106
Gayda S.V. (2014), Techniques for recycled of post-consumer wood in the Productsion of quality particleboard. Forestry, Forest, Paper and Woodworking Industry, 40, 41-51. https://doi.org/10.36930/42144010
Gayda S.V. (2013), Technologies and recommendations on the utilization of post-consumer wood in woodworking industry. Forestry, Forest, Paper and Woodworking Industry, 39(1), 48-67. (In Ukrainian). https://doi.org/10.36930/42133909
Gayda S.V. (2012), Productsion techniques and properties of fuel pellets produced from post-consumer wood. Forestry, Forest, Paper and Woodworking Industry, 38, 112-150. https://doi.org/10.36930/42123822
Gayda S.V., Dyak T.P. (2011), The analysis of economic efficiency of post-consumer wood use for particleboard manufacture for LLC Swisspan Limited. Forestry, Forest, Paper and WoodworkingI ndustry 37(2), 129-136. https://doi.org/10.36930/421137225
Gayda S.V. (2011), The investigation of physical and mechanical properties of wood particleboards made from post-consumer wood. Forestry, Forest, Paper and Woodworking Industry, 37(2), 95-110. https://doi.org/10.36930/421137221
Gayda S.V., Koval L.I. (2011), Recycling waste from sawing MDF. Forestry, Forest, Paper and Woodworking Industry 37(1), 49-53. (In Ukrainian). https://doi.org/10.36930/421137111
Gayda S.V., Voronovich V.V. (2011), Comparative analysis of bending particularities for various post-consumer wood species and age categories. Forestry, Forest, Paper and Woodworking Industry37(1), 84-88. (In Ukrainian). https://doi.org/10.36930/421137121
Gayda S.V. (2011), Recovered wood is additional resource of raw material. Forestry, Forest, Paper and Woodworking Industry 37(1), 238-244. (In Ukrainian). https://doi.org/10.36930/421137165
GaydaS.V., Maksymiv V.M. (2010), From recycled post-consumer wood towards prime quality particleboard. Forestry, Forest, Paper and Woodworking Industry, 36, 57-77. https://doi.org/10.36930/42103610
Gayda S.V. (2010), A comparative analysis of physical and mechanical parameters of variously designed glued boards made of post-consumer recovered wood. Forestry, Forest, Paper and Woodworking Industry, 36, 81-91. https://doi.org/10.36930/42103612
Gayda S.V. (2009), Potential of post-consumer recovered wood and possible ways of it using in Ukraine. Forestry, Forest, Paper and Woodworking Industry, 35, 63-83. https://doi.org/10.36930/42093509
Gayda S.V., Maksymiv V.M., Tunytsya T.Yu. (2008), Elaboration of post-consumer wood classifier. Forestry, Forest, Paper and Woodworking Industry, 34, 55-68. (In Ukrainian). https://doi.org/10.36930/42083410
Gayda S.V. (2008), Chemical compound and degree of its contamination as the basis to systematization of post-consumer wood. Forestry, Forest, Paper and Woodworking Industry, 34, 68-79. (In Ukrainian). https://doi.org/10.36930/42083411
Gayda S.V., Koval L.I. (2008), Problems and features of vacuum lamination of MDF for facades. Forestry, Forest, Paper and Woodworking Industry, 34, 5. (In Ukrainian). https://doi.org/10.36930/42083419
Gayda S.V. (2007), А problem of arboreal raw material is in Europe and Ukraine. Forestry, Forest, Paper and Woodworking Industry, 33, 55-63. (In Ukrainian). https://doi.org/10.36930/42073312
Gayda S.V., Maksymiv V.M. (2007), Analysis, features, problems and experience of the use of additional resources of raw material – wastes and of used wood. Forestry, Forest, Paper and Woodworking Industry, 33, 63-73. (In Ukrainian). https://doi.org/10.36930/42073313
Gayda S.V. (2007), Research of concentration of operations is in modern furniture Productsion. Forestry, Forest, Paper and Woodworking Industry, 33, 73-79. (In Ukrainian) https://doi.org/10.36930/42073314
Gayda S.V. (2014): Sposoby podgotovki k pererabotke vtorichno ispol'zuyemoy drevesiny ig-lofrezernymi i shchotochnymi stankami [Preparation methods for processing of post-consumer wood (PCW) needle-milling and brushing machines]. Actual problems of forest complex 40:65-69 (in Rus-sian).
Gayda S.V. (2014): Teoreticheskoye obosnovaniye podkhoda po prognozirovaniyu prochnosti drevesnostruzhechnykh plit iz vtorichno ispol'zuyemoy drevesiny [The theoretical rationale for the approach on the prediction the strength of particleboard from recycled wood]. Actual problems of forest complex 38:212-216 (in Russian).
Gayda S.V. (2013): Resursooshchadnі tekhnologії pereroblennya vzhivanoї derevini [Re-source-saving technologies of recycling of post-consumer wood]. Scientific Bulletin of NULES of Ukraine: Technology and Energy of agroindustrial complex 185(2):271-280, (in Ukrainian).
Gayda S.V. (2013): Osnovy formuvannya klasyfikatora vtorynnykh derevynnykh resursiv [Ba-ses of secondary wood resources classifier formation]. Scientific Works of the Forestry Academy of Sciences of Ukraine 11:208-215 (in Ukrainian).
Gayda S.V., Voronovich V.V. (2011): Issledovanie osobennostey gnut'ya vtorichno ispol'zue-moy drevesiny [Investigation of the features of bending of post-consumer wood]. Scientific progress – creative young: proceedings of the International Scientific Conference, Mari State University: 190-192 (in Russian).
DIN 68705-2:2014-10 Plywood – Part 2: Blockboard and laminboard for general use. Germa-ny, (in Deutsch).
GOST 13715-78 Plity stolyarnye. Tekhnicheskie usloviya [Blockboards. Technical specifica-tions]. Moskow: Publishing house of standards, (in Russian).
GOST 9625-2013 (EN 310:1993, EN 13986:2004). Drevesyna sloystaya kleenaya. Metody opredelenyya predela prochnosty y modulya upruhosty pry statycheskom yz·hybe [Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending]. Moskow: Publishing house of standards, (in Russian).
GOST 9620-94. Drevesyna sloystaya kleenaya. Otbor obraztsov y obshchye trebovanyya pry yspytanyy [Laminated glued wood. Sampling and general requirements in testing]. Moskow: Publish-ing house of standards, (in Russian).
GOST 9624-2009. Drevesyna sloystaya kleenaya. Metod opredelenyya predela prochnosty pry skalyvanyy [Laminated glued wood. Method for determination of shear strength]. Moskow: Pub-lishing house of standards, (in Russian).
Published
Issue
Section
How to Cite
