Розміщення схеми розпилювання на робочій зоні охоплення  сегмента та сектора з урахуванням їх реальної форми

Володимир Маєвський; Андрій Вус; Оксана Маєвська; Роман Мацюк

doi:10.36930/

Authors

V.O. Mayevskyy Ukrainian National Forestry University https://orcid.org/0000-0001-5820-9454
A.Ya. Vus
O.M. Mayevska Ukrainian National Forestry University
R.I. Matsyuk Ukrainian National Forestry University

DOI:

https://doi.org/10.36930/

Keywords:

log, segment, sector, covering working zone, location of sawing pattern, real shape, simulation, volume, log rotation.

Abstract

The simulation method for variants of location of sawing pattern on the working zone covering by sawing pattern of segment and sector was considered. Consideration of real shape for log (segment) based on results of scanning for shape surface of log cross sections was provided for simulation process.

References

Mayevskyy, V., Vus, A., Maksymiv, V. (2013) Location of sawing pattern on the covering working zone of log with consideration of their real shape. Bulletin of Kharkiv Petro Vasylenko Na-tional Technical University of Agriculture, 143, 60-68.

Mayevskyy, V., Vus, A. (2012) Determination of width for working zone covering by sawing pattern of log, cant, segment and sector with consideration of their real shape. Scientific Bulletin of the UNFU, 22.11, 325-334.

Mayevskyy, V., Vus, A. (2011) Simulation of log sawing by through-and-through method in-to lumber with consideration of real log shape. Bulletin of Lviv Polytechnic National University: Computer Systems of Design. Theory and Practice, 711, 91-100.

Mayevskyy, V., Vus, A. (2012) Simulation of log sawing by sector method into plain sawn lumber with consideration of real log shape. Scientific Bulletin of the UNFU, 22.10, 307-315.