Comparative analysis of manufacturing processes of various designs of sliding doors in the hall

S.V. Gayda; M.M. Ilkiv; L.V. Salapak

doi:10.36930/42214803

Authors

S.V. Gayda
M.M. Ilkiv
L.V. Salapak

DOI:

https://doi.org/10.36930/42214803

Keywords:

furniture facade, furniture products, technologies, frame and tile constructions, wood products, gluing, PVA glue, technological processes

Abstract

A comparison of the economic efficiency of investment investments of technological processes for the manufacture of hallway doors from different materials and different structures from a set of furniture for the corridor was made. The necessary materials for two types of production of facade surfaces were selected and calculated - sliding doors for the hallway, which are included in the wardrobe wall set, made of different materials from natural wood. The necessary basic equipment was selected and calculated in accordance with the developed production technologies for two options for the production of facade surfaces - sliding doors for hallways. The necessary technological routes were selected, developed and calculated for each variant of the production of facade surfaces - sliding doors for hallways. The necessary equipment has been calculated in order to technologically perform two variants of sliding doors - entrance hall facades using different materials - natural wood and MDF boards/board. Two shop plans are proposed according to the developed technologies for the production of facade surfaces. A rational technological process for the production of facade surfaces - sliding doors for hallways is proposed. The effectiveness of choosing one technological process for a certain facade of the hallway, which is included in the set of wardrobe walls made of different materials, is calculated and determined. It has been calculated and substantiated that it is worth choosing option number two for the production of facades from block elements, since there is a much smaller investment investment of UAH 50,816.05 thousand (for the first one - UAH 149,712.39 thousand), that is, the value of the comparative economic efficiency indicator is lower. albeit with a longer payback period of 0.85 compared to 0.27.

References

Dyachun Z.J. [2007]: Konstruyuvannya mebliv: Korpusni vyroby [Furniture design: Cabinet products]: – Kyiv: Mohyla Academy House, 387 p. (in Ukrainian).

Gayda S.V. (2000). Матеріали для виготовлення виробів з деревини / Materials for the Productsion of wood Productss. Lviv: BMC. – 160 p. (in Ukrainian).

Gayda S.V. (2001). Раціональне конструювання виробів з деревини / Rational constructing of wood Productss. Lviv: BMC. – 93 p. (in Ukrainian).

Gayda S.V. (2007). Проблема деревної сировини у Європі та Україні / Problema derevnoyi syrovyny u Yevropi ta Ukrayini [А problem of arboreal raw material is in Europe and Ukraine]. Forestry, Forest, Paper and Woodworking Industry 33:55-63 (in Ukrainian).

Gayda S.V. (2011). Recycled of post-consumer wood is for the production of particleboard in Ukraine / Proceedings of the XXI International symposium Adhesives in Woodworking Industry (Slovakia, Zvolen Juve 29 – July 01. 2011). TU Zvolen. – P. 108-121.

Gayda S.V. (2011). Вживана деревина – додатковий ресурс сировини / Vzhyvana derevyna – dodatkovyy resurs syrovyny [Recovered wood is additional resource of raw material]. Forestry, Forest, Paper and Woodworking Industry 37(1). 238-244 (in Ukrainian).

Gayda S.V. (2012). Production techniques and properties of fuel pellets produced from post-consumer wood. Forestry, Forest, Paper and Woodworking Industry 38: 112-150.

Gayda S.V. (2013). Techniques for utilization of post-consumer wood in the production of fuel pellets and briquettes. Proceedings of the XXI International symposium Adhesives in Woodworking Industry (Slo-vakia, Zvolen Juve 23-26. 2013). TU Zvolen, 119-130.

Gayda S.V. (2013). Technologies and recommendations on the utilization of post-consumer wood in woodworking industry. Forestry, Forest, Paper and Woodworking Industry 39(1):48-67 (in Ukrainian).

Gayda S.V. (2013). The technological solutions for recycling of post-consumer wood. Proceedings of I International Interdisciplinary Scientific Conference Formation of stable outlook as the basis of sustainable development (Ukraine, Lviv, 14-16 March 2013) UNFU: Lviv, 5-11.

Gayda S.V. (2013). Основи формування класифікатора вторинних деревинних ресурсів / Osnovy formuvannya klasyfikatora vtorynnykh derevynnykh resursiv [Bases of secondary wood resources classifier formation]. Scientific Works of the Forestry Academy of Sciences of Ukraine 11:208-215 (in Ukrainian).

Gayda S.V. (2013). Розроблення технології виробництва паливних гранул на основі енергетичного потенціалу вживаної деревини [Development of technology for the production of fuel pellets based on the energy potential of used wood]. Scientific Bulletin of UNFU 23.14:83-93. (in Ukrainian).

Gayda S.V. (2014). Techniques for recycled of post-consumer wood in the production of quality parti-cleboard. Forestry, Forest, Paper and Woodworking Industry 40:41-51.

Gayda S.V. (2014). Teoreticheskoye obosnovaniye podkhoda po prognozirovaniyu prochnosti drevesnostruzhechnykh plit iz vtorichno ispol'zuyemoy drevesiny [The theoretical rationale for the approach on the prediction the strength of particleboard from recycled wood]. Actual problems of forest complex 38:212-216 (in Russian).

Gayda S.V. (2018). Strength of combined blockboard made of post-consumer wood (PCW). Bulletin of KhNTUA 197:3-9, (in Ukrainian).

Gayda S.V. (2015). Tekhnologії і fіziko-mekhanіchnі vlastivostі stolyarnikh plit іz vzhivanoї derevini [Technology and physical and mechanical properties blockboard made of post-consumer wood]. Technical service of agriculture, forestry and transport systems 3(1):145-152 (in Ukrainian).

Gayda S.V. (2016). A investigation of form of stability of variously designed blockboards made of post-consumer wood. ProLigno 12(1):22-31.

Gayda S.V. (2016). Ekologo-tekhnologicheskiye aspekty pererabotki vtorichno ispol'zuyemoy drevesiny dlya proizvodstva pressovannykh materialov [Ecological and technological aspects of recycling post-consumer wood for production compacted materials]. Lesnoy vestnik / Forestry bulletin of MSFU 20(3):15-22 (in Russian).

Gayda S.V. (2017). Using fuzzy expert systems for decision support in the process of post-consumer wood sorting. Forestry, Forest, Paper and Woodworking Industry, 43, 5-20. https://doi.org/10.36930/42174301 (in Ukrainian).

Gayda S.V. (2016). Research on physical and mechanical characteristics of front blockboards made from post-consumer wood [Дослідження фізико-механічних характеристик фасадних столярних плит із вживаної деревини]. Forestry, Forest, Paper and Woodworking Industry 42: 33-50.

Gayda S.V. (2016). Технологічні підходи до поверхневого очищення вживаної деревини голкофре-зерним інструментом / Tekhnolohichni pidkhody do poverkhnevoho ochyshchennya vzhyvanoyi derevyny holkofrezernym instrumentom [Technological approaches to cleaning of surface of post-consumer wood of needle-milling tools]. Bulletin of KhNTUA 178:3-11(in Ukrainian).

Gayda S.V., Kiyko O.A. (2018). Shape stability as a quality criterion for PCW-made blockboards. Pro-ceedings of the Forestry Academy of Sciences of Ukraine, 17, 185-192. https://doi.org/10.15421/411834 (in Ukrainian)

Gayda S.V. (2017). A technology and properties of furniture board made of post-consumer wood. Actual problems of forest complex 48:34-38 (in Russian).

Gayda S.V. (2017). Комплексні дослідження зміни пружних властивостей вживаної деревини ялиці з віком / Kompleksni doslidzhennya zminy pruzhnykh vlastyvostey vzhyvanoyi derevyny yalytsi z vikom [The complex studies on the change of elastic properties of post-consumer fir wood with age]. Forestry, Forest, Pa-per and Woodworking Industry 43:58-72 (in Ukrainian). doi: https://doi.org/10.36930/42174308

Gayda S.V. (2018). Дослідження та аналіз характеристик щитових конструкцій із вживаної дереви-ни / Doslidzhennya ta analiz kharakterystyk shchytovykh konstruktsiy iz vzhyvanoyi derevyny [A investigation and analysis of characteristics of solid furniture boards made of post-consumer wood]. Forestry, Forest, Paper and Woodworking Industry 44:14-24 (in Ukrainian). doi: https://doi.org/10.36930/42184402

Gayda S.V. (2018). Технологія МДФ-фасадів / Tekhnolohiyi MDF-Fasadiv [MDF Facade Technologies]. Forestry, Forest, Paper and Woodworking Industry 44:70-83 (in Ukrainian). doi: https://doi.org/10.36930/42184410

Gayda S.V. (2019). Scientific and technical basis of the use of used wood in woodworking: thesis of the Doctor of Technical Sciences in the specialty 05.23. – Lviv: UNFU. – 465 (in Ukrainian).

Gayda S.V. (2019). Визначення та порівняння властивостей вживаної деревини основних хвойних порід / Vyznachennya ta porivnyannya vlastyvostey vzhyvanoyi derevyny osnovnykh khvoynykh porid [A determination and comparison of properties of post-consumer wood of the basic conifers]. Forestry, Forest, Paper and Woodworking Industry 45:38-49 (in Ukrainian). doi: https://doi.org/10.36930/42194506

Gayda S.V. (2020). Аналіз конструкцій та технологій виготовлення сучасних меблевих фасадів / Analiz konstruktsiy ta tekhnolohiy vyhotovlennya suchasnykh meblevykh fasadiv [Analysis of structures and technologies of manufacture of modern furniture facades]. Forestry, Forest, Paper and Woodworking Industry 46:54-64 (in Ukrainian). doi: https://doi.org/10.36930/42204606

Gayda S.V., Bilyy Ya.M. (2016). The investigation of the shape stability of glued panels made of post-consumer wood. Forestry, Forest, Paper and Woodworking Industry, 42, 69-79. https://doi.org/10.36930/42164211 (in Ukrainian).

Gayda S.V., Bilyy Ya.M. (2019). Дослідження технологічних процесів виготовлення ліжок двоспа-льних різних конструкцій / Doslidzhennya tekhnolohichnykh protsesiv vyhotovlennya lizhok dvospalʹnykh riznykh konstruktsiy [A investigation of technological processes of making beds of double different designs]. Forestry, Forest, Paper and Woodworking Industry 45:21-31 (in Ukrainian). doi: https://doi.org/10.36930/42194504

Gayda S.V., Grytsak S.A. (2020). Порівняльний аналіз фізико-механічних характеристик гнутих елементів із різних порід дерев / Porivnyalʹnyy analiz fizyko-mekhanichnykh kharakterystyk hnutykh elementiv iz riznykh porid derev [Comparative analysis of physical and mechanical characteristics of bent elements from different tree species]. Forestry, Forest, Paper and Woodworking Industry 46:16-27 (in Ukrainian). doi: https://doi.org/10.36930/42204602

Gayda S.V., Ilkiv M.M. (2021). Дослідження технологічних процесів виготовлення меблевих фаса-дів з масивної деревини // Doslidzhennya tekhnolohichnykh protsesiv vyhotovlennya meblevykh fasadiv z masyvnoyi derevyny. [Research of technological processes of manufacture of meble facades from solid wood]. Forestry, Forest, Paper and Woodworking Industry 47:22-33, (in Ukrainian). doi: https://doi.org/10.36930/42214703

Gayda S.V., Kiyko O.A. (2021). Властивості вживаної деревини як визначальний чинник якості меблевих виробів / Vlastyvosti vzhyvanoyi derevyny yak vyznachalʹnyy chynnyk yakosti meblevykh vyrobiv [Properties of used wood as a determining factor in the quality of furniture products]. Scientific Works of the Forestry Academy of Sciences of Ukraine 23:152-162, (in Ukrainian). https://doi.org/10.15421/412135

Gayda S.V., Kiyko O.A. [2020]: Determining the regime parameters for the surface cleaning of post-consumer wood by a needle milling tool. Eastern-European Journal of Enterprise Technologies, 5 [1 [107]], 89–97. doi: https://doi.org/10.15587/1729-4061.2020.212484

Gayda S.V., Kiyko O.A. [2020]: The investigation of properties of blockboards made of post-consumer wood. Poznan : Drewno, 63 [206], 77-102. doi: https://doi.org/10.12841/wood.1644-3985.352.10

Gayda S.V., Kiyko O.A., Guz M.M. (2022). Research of the structure of stump and rootwood for effective use in the production of wood products. Folia Forestalia Polonica, Series A – Forestry, 64 (3):131–142, doi: https://doi.org/10.2478/ffp-2022-0011

Gayda S.V. (2004). Інтегровані технології меблевого виробництва [Integrated technologies of furniture production]. Scientific Bulletin of UNFU 14.4:118-121. (in Ukrainian).

Gayda S.V., Maksymiv, V.M. (2007). Аналіз, особливості, проблеми та досвід використання дода-ткових ресурсів сировини – відходів та вживаної деревини / Analiz, osoblyvosti, problemy ta dosvid vykorystannya dodatkovykh resursiv syrovyny – vidkhodiv ta vzhyvanoyi derevyny [Analysis, features, problems and experience of the use of additional resources of raw material – wastes and of used wood]. Forestry, Forest, Paper and Woodworking Industry 33:63-73 (in Ukrainian).

Gayda S.V., Petrishak I.V. (2020). Дослідження впливу породи та режимів шліфування на питому продуктивність шліфувальної шкурки / Doslidzhennya vplyvu porody ta rezhymiv shlifuvannya na pytomu produktyvnistʹ shlifuvalʹnoyi shkurky [Study of the influence of breed and grinding modes on the specific productivity of grinding skin]. Forestry, Forest, Paper and Woodworking Industry 46:5-15 (in Ukrainian). doi: https://doi.org/10.36930/42204601

Gayda S.V., Petryshak I.V., Humeniuk Zh.Ya. (2021). Vyznachennya vplyvu porody ta rezhymiv shlifuvannya na shorstkistʹ poverkhni derevyny [Determination of the influence of rock and grinding modes on the surface roughness of wood]. Forestry, Forest, Paper and Woodworking Industry 47:5-15 (in Ukrainian). doi: https://doi.org/10.36930/42214701.

Gayda S.V., Salapak L.V., Lesiv L.E. (2021). Vyznachennya efektyvnoho tekhnolohichnoho protsesu vyhotovlennya riznykh opornykh elementiv dlya funktsionalʹnykh ploshchyn. [Determination of an efficient technological process of manufacturing various support elements for functional surfaces]. Forestry, Forest, Paper and Woodworking Industry 47: 58-72, (in Ukrainian). doi: https://doi.org/10.36930/42214708

Gayda S.V., Voytovych I.G. (2017). Дослідження міцності та стійкості елементів ґратчастих мебле-вих виробів із вживаної деревини / Doslidzhennya mitsnosti ta stiykosti elementiv gratchastykh meblevykh vyrobiv iz vzhyvanoyi derevyny [Durability and stability of elements for beam furniture products made from post-consumer wood are investigated]. Bulletin of KhNTUA 189:62-70 (in Ukrainian).

Gayda S.V., Voytovych I.G. (2020). Дослідження технологічних процесів виготовлення ніжок сто-лів обідніх різних конструкцій / Doslidzhennya tekhnolohichnykh protsesiv vyhotovlennya nizhok stoliv obidnikh riznykh konstruktsiy [Research of technological processes of production of legs of tables of various designs]. Forestry, Forest, Paper and Woodworking Industry 46:36-49 (in Ukrainian). doi: https://doi.org/10.36930/42204604

Gayda S.V., Kiyko O.A. (2013). Технология очистки вторично используемой древесины иглофре-зерными станками [The technology of cleaning recycled wood with needle milling machines] // Actual prob-lems and prospects of the development of LPK: materials II NTK., September 9-11, 2013 - Kostroma. - P. 36-39. (in Russian).

Voytovych I.G. (2010). Osnovy tekhnolohiyi vyrobiv z derevyny [Fundamentals of wood products technology]. – Lviv: Country of Angels, 305 p. (in Ukrainian).

Zayats I.M. (1995). Tekhnolohiya vyrobiv z derevyny [Technology of wood products]: Kyiv, 1995. (in Ukrainian).