Research of technological processes of manufacture of meble facades from solid wood

S.V. Gayda; M.M. Ilkiv; D.B. Savka

doi:10.36930/42214703

Authors

S.V. Gayda
M.M. Ilkiv
D.B. Savka

DOI:

https://doi.org/10.36930/42214703

Keywords:

furniture facade, furniture board, technologies, assembly, gluing, frame-and-tile constructions, wood products, technological processes.

Abstract

The analysis of a condition of a question is made the facades of furniture doors of case products are analyzed. Structural components for the creation of facade furniture doors are analyzed. Designs of front furniture doors for research are developed. Modern materials for selection of three variants of facade furniture doors are selected and calculated. A method of comparative research of technological processes of obtaining furniture doors with different components and components has been developed. Technological operations during creation of front furniture doors of the accepted kind of researches are offered. Modern equipment for technological operations during the creation of facade furniture doors of the accepted type of research has been selected. Technological routes have been developed and plans of shops with selection of the accepted equipment for creation of three Varieties of front doors are constructed. The accepted equipment is calculated and its analysis by price is made and the total cost for creation of three Varieties of front furniture doors is analyzed. Production staff was selected and their number was analyzed to create three types of facade furniture doors. The comparative analysis of technological processes is made and the rational Variety on creation of front furniture doors of the accepted design is chosen. The indicators of economic efficiency for all Varieties in the manufacture of facade doors are calculated and confirmed by rational numerical indicators. It is established that the option of making door furniture facades from a furniture board is the most cost-effective, ie effective for implementation in production, as it has: the lowest or lowest cost among all three Different types (6758.23 / 12000 = 563.19 UAH .); acceptable, ie the lowest price (7974.71 / 12000 = UAH 664.60); the smallest investments (4796.57 thousand UAH); the minimum payback period of investment costs is 3.94 years.

References

Voytovych I.G. [2010]: Osnovy tekhnolohiyi vyrobiv z derevyny [Fundamentals of wood products technology]. – Lviv: Country of Angels, 305 p. (in Ukrainian).

Dyachun Z.J. [2007]: Konstruyuvannya mebliv: Korpusni vyroby [Furniture design: Cabinet products]: – Kyiv: Mohyla Academy House, 387 p. (in Ukrainian).

Gayda, S.V., Kiyko O.A. [2020]: Determining the regime parameters for the surface cleaning of post-consumer wood by a needle milling tool. Eastern-European Journal of Enterprise Technologies, 5 [1 [107]], 89–97. doi: https://doi.org/10.15587/1729-4061.2020.212484

Gayda, S.V., Kiyko O.A. [2020]: The investigation of properties of blockboards made of post-consumer wood. Poznan : Drewno, 63 [206], 77-102. doi: https://doi.org/10.12841/wood.1644-3985.352.10

Gayda S.V. (2020) : Аналіз конструкцій та технологій виготовлення сучасних меблевих фасадів / Analiz konstruktsiy ta tekhnolohiy vyhotovlennya suchasnykh meblevykh fasadiv [Analysis of structures and technologies of manufacture of modern furniture facades]. Forestry, Forest, Paper and Woodworking Industry 46:54-64 (in Ukrainian). doi: https://doi.org/10.36930/42204606

Gayda S.V., Petryshak I.V., Somar G.V. (2020) : Дослідження впливу породи та режимів шліфування на питому продуктивність шліфувальної шкурки / Doslidzhennya vplyvu porody ta rezhymiv shlifuvannya na pytomu produktyvnistʹ shlifuvalʹnoyi shkurky [Study of the influence of breed and grinding modes on the specific productivity of grinding skin]. Forestry, Forest, Paper and Woodworking Industry 46:5-15 (in Ukrainian). doi: https://doi.org/10.36930/42204601

Gayda S.V., Voytovych I.G., Orikhovskyy R.Ya. (2020) : Дослідження технологічних про-цесів виготовлення ніжок столів обідніх різних конструкцій / Doslidzhennya tekhnolohichnykh protsesiv vyhotovlennya nizhok stoliv obidnikh riznykh konstruktsiy [Research of technological processes of production of legs of tables of various designs]. Forestry, Forest, Paper and Woodwork-ing Industry 46:36-49 (in Ukrainian). doi: https://doi.org/10.36930/42204604

Gayda S.V., Grytsak S.A. (2020) : Порівняльний аналіз фізико-механічних характеристик гнутих елементів із різних порід дерев / Porivnyalʹnyy analiz fizyko-mekhanichnykh kharakterystyk hnutykh elementiv iz riznykh porid derev [Comparative analysis of physical and mechanical charac-teristics of bent elements from different tree species]. Forestry, Forest, Paper and Woodworking In-dustry 46:16-27 (in Ukrainian). doi: https://doi.org/10.36930/42204602

Gayda S.V., Bilyy Ya.M. (2019): Дослідження технологічних процесів виготовлення ліжок двоспальних різних конструкцій / Doslidzhennya tekhnolohichnykh protsesiv vyhotovlennya lizhok dvospalʹnykh riznykh konstruktsiy [A investigation of technological processes of making beds of double different designs]. Forestry, Forest, Paper and Woodworking Industry 45:21-31 (in Ukrainian). doi: https://doi.org/10.36930/42194504

Gayda S.V. (2019): Визначення та порівняння властивостей вживаної деревини основ-них хвойних порід / Vyznachennya ta porivnyannya vlastyvostey vzhyvanoyi derevyny osnovnykh khvoynykh porid [A determination and comparison of properties of post-consumer wood of the basic conifers]. Forestry, Forest, Paper and Woodworking Industry 45:38-49 (in Ukrainian). doi: https://doi.org/10.36930/42194506

Gayda S.V. (2018): Дослідження та аналіз характеристик щитових конструкцій із вжи-ваної деревини / Doslidzhennya ta analiz kharakterystyk shchytovykh konstruktsiy iz vzhyvanoyi derevyny [A investigation and analysis of characteristics of solid furniture boards made of post-consumer wood]. Forestry, Forest, Paper and Woodworking Industry 44:14-24 (in Ukrainian). doi: https://doi.org/10.36930/42184402

Gayda S.V. (2018): Технологія МДФ-фасадів / Tekhnolohiyi MDF-Fasadiv [MDF Facade Technologies]. Forestry, Forest, Paper and Woodworking Industry 44:70-83 (in Ukrainian). doi: https://doi.org/10.36930/42184410

Gayda S.V., Voytovych I.G. (2017): Дослідження міцності та стійкості елементів ґрат-частих меблевих виробів із вживаної деревини / Doslidzhennya mitsnosti ta stiykosti elementiv gratchastykh meblevykh vyrobiv iz vzhyvanoyi derevyny [Durability and stability of elements for beam furniture products made from post-consumer wood are investigated]. Bulletin of KhNTUA 189:62-70 (in Ukrainian).

Gayda S.V. (2017): A technology and properties of furniture board made of post-consumer wood. Actual problems of forest complex 48:34-38 (in Russian).

Gayda S.V. (2016): Ekologo-tekhnologicheskiye aspekty pererabotki vtorichno ispol'zuye-moy drevesiny dlya proizvodstva pressovannykh materialov [Ecological and technological aspects of recycling post-consumer wood for production compacted materials]. Lesnoy vestnik / Forestry bulle-tin of MSFU 20(3):15-22 (in Russian).

Gayda S.V. (2016): Технологічні підходи до поверхневого очищення вживаної дереви-ни голкофрезерним інструментом / Tekhnolohichni pidkhody do poverkhnevoho ochyshchennya vzhyvanoyi derevyny holkofrezernym instrumentom [Technological approaches to cleaning of surface of post-consumer wood of needle-milling tools]. Bulletin of KhNTUA 178:3-11 (in Ukrainian).

Gayda S.V., Ya.M. Bilyy (2016): Дослідження формостійкості клеєних щитів із вжива-ної деревини / Doslidzhennya formostiykosti kleyenykh shchytiv iz vzhyvanoyi derevyny [The investigation of the shape stability of glued panels made of post-consumer wood]. Forestry, Forest, Paper and Woodworking Industry 42: 69-79 (in Ukrainian). doi: https://doi.org/10.36930/42164211

Gayda, S.V., Maksymiv, V.M. (2007): Аналіз, особливості, проблеми та досвід викори-стання додаткових ресурсів сировини – відходів та вживаної деревини / Analiz, osoblyvosti, problemy ta dosvid vykorystannya dodatkovykh resursiv syrovyny – vidkhodiv ta vzhyvanoyi derevyny [Analysis, features, problems and experience of the use of additional resources of raw material – wastes and of used wood]. Forestry, Forest, Paper and Woodworking Industry 33:63-73 (in Ukrainian).

Gayda S.V. (2016): A investigation of form of stability of variously designed blockboards made of post-consumer wood. ProLigno 12(1):22-31.

Gayda S.V. (2015): Tekhnologії і fіziko-mekhanіchnі vlastivostі stolyarnikh plit іz vzhivanoї derevini [Technology and physical and mechanical properties blockboard made of post-consumer wood]. Technical service of agriculture, forestry and transport systems 3(1):145-152 (in Ukrainian).

Gayda S.V. (2013): Основи формування класифікатора вторинних деревинних ресурсів / Osnovy formuvannya klasyfikatora vtorynnykh derevynnykh resursiv [Bases of secondary wood re-sources classifier formation]. Scientific Works of the Forestry Academy of Sciences of Ukraine 11:208-215 (in Ukrainian).

Gayda S.V. (2011): Вживана деревина – додатковий ресурс сировини / Vzhyvana derevyna – dodatkovyy resurs syrovyny [Recovered wood is additional resource of raw material]. Forestry, Forest, Paper and Woodworking Industry 37(1): 238-244 (in Ukrainian).

Gayda, S.V. (2007): Проблема деревної сировини у Європі та Україні / Problema derevnoyi syrovyny u Yevropi ta Ukrayini [А problem of arboreal raw material is in Europe and Ukraine]. Forestry, Forest, Paper and Woodworking Industry 33:55-63 (in Ukrainian).

Gayda S.V., Kshyvetskyy B.Ya., Voytovych I.G., Prokopovych B.V. (2002): Тлумачний словник з деревооброблення / Tlumachnyy slovnyk z derevoobroblennya [Explanatory dictionary from Woodworking]. Lviv: UNFU. – 280 p. (in Ukrainian).

Gayda S.V. (2018). Strength of combined blockboard made of post-consumer wood (PCW). Bulletin of KhNTUA 197:3-9, (in Ukrainian).

Gayda S.V. (2013). Resource-saving technologies of recycling of post-consumer wood]. Sci-entific Bulletin of NULES of Ukraine: Technology and Energy of agroindustrial complex 185(2):271-280, (in Ukrainian).

Zayats I.M. (1995): Tekhnolohiya vyrobiv z derevyny [Technology of wood products]: Kyiv, 1995. (in Ukrainian).

Gayda S.V. (2011). Recycled of post-consumer wood is for the production of particleboard in Ukraine / Proceedings of the XXI International symposium Adhesives in Woodworking Industry (Slovakia, Zvolen Juve 29 – July 01. 2011). TU Zvolen. – P. 108-121.

Gayda S.V. (2013). Techniques for utilization of post-consumer wood in the production of fuel pellets and briquettes. Proceedings of the XXI International symposium Adhesives in Wood-working Industry (Slovakia, Zvolen Juve 23-26. 2013). TU Zvolen, 119-130.

Gayda S.V. (2013). Розроблення технології виробництва паливних гранул на основі енергетичного потенціалу вживаної деревини (Development of technology for the production of fuel pellets based on the energy potential of used wood). Scientific Bulletin UNFU 23.14:83-93. (in Ukr).

Gayda S.V. (2014). Teoreticheskoye obosnovaniye podkhoda po prognozirovaniyu prochnosti drevesnostruzhechnykh plit iz vtorichno ispol'zuyemoy drevesiny (The theoretical rationale for the approach on the prediction the strength of particleboard from recycled wood). Actual problems of forest complex 38:212-216 (in Russian).

Gayda S.V., Kiyko O.A. (2018). Shape stability as a quality criterion for PCW-made block-boards. Proceedings of the Forestry Academy of Sciences of Ukraine, 17, 185-192. https://doi.org/10.15421/411834 (in Ukrainian)

Gayda S.V. (2015). Modeling properties of blockboards made of post-consumer wood on the basis of the finite element method. Forestry, Forest, Paper and Woodworking Industry, 41, 39-49. https://doi.org/10.36930/42154106

Gayda S.V. (2016). Research on physical and mechanical characteristics of front blockboards made from post-consumer wood (Дослідження фізико-механічних характеристик фасадних сто-лярних плит із вживаної деревини). Forestry, Forest, Paper and Woodworking Industry 42: 33-50.

Gayda S.V. (2016). Технологічні підходи до поверхневого очищення вживаної деревини голкофрезерним інструментом / Tekhnolohichni pidkhody do poverkhnevoho ochyshchennya vzhyvanoyi derevyny holkofrezernym instrumentom (Technological approaches to cleaning of surface of post-consumer wood of needle-milling tools). Bulletin of KhNTUA 178:3-11(in Ukrainian).

Gayda S.V. (2019). Scientific and technical basis of the use of used wood in woodworking: thesis of the Doctor of Technical Sciences in the specialty 05.23. – Lviv: UNFU. – 465 (in Ukraini-an).

Gayda S.V., Kiyko O.A. (2021). Властивості вживаної деревини як визначальний чинник якості меблевих виробів / Vlastyvosti vzhyvanoyi derevyny yak vyznachalʹnyy chynnyk yakosti meblevykh vyrobiv (Properties of used wood as a determining factor in the quality of furniture prod-ucts). Scientific Works of the Forestry Academy of Sciences of Ukraine 23:152-162, (in Ukrainian). https://doi.org/10.15421/412135