Possibility of using of textile fibers waste in the production of wood composite materials

O.I. Bryn

doi:10.36930/42204603

Authors

O.I. Bryn

DOI:

https://doi.org/10.36930/42204603

Keywords:

wood composite materials, textile waste, wood-polymer composition, textile fibers, pressing parameters, physical and mechanical properties.

Abstract

Wood composite materials (WCM) are one of the most common materials for the needs of the furniture industry, construction, aircraft, ship and wagon construction. The raw material for the manufacture of WCM is wood. Due to the annual increase in demand for wood raw materials and sparsely forested territory of Ukraine, we have a question about expanding the raw material base. The textile industry is working and developing intensively in Ukraine. Much of the textile waste is not widely used in practice. Most textile waste is thrown out, which requires additional material costs for garbage removal. In addition, textiles are an integral part of solid waste, which is not sorted and goes to landfills. That has negatively affects the environmental situation. Therefore, the question arose about the manufacture of DCM with partial replacement of wood raw materials for textile fibers. Sources of textile fibers are waste from the textile, clothing and knitwear industries, as well as secondary raw materials. The use of textile fibers in the production of WCM requires their previous preparation. Analysis of literature sources showed that it is advisable to use mechanical grinding methods for textile waste (methods of abrasion, impact and division into fiber). The introduction of additional operations in the technological process of manufacturing WCM (particleboard, fiberboard, OSB) with textile fibers is analyzed. The addition of textile fiber waste to various types of composite materials leads to the deterioration of physical and mechanical properties. However, some materials meet the requirements of the standard with minor replacement of wood particles by textile waste. But even such a small saving of wood resources is significant in volumes of production.

References

Sagal, S.Z. (2014). Analiz potentsialu lisovoho sektoru Ukrayiny ta vyyavlennya faktoriv, shcho halʹmuyutʹ yoho innovatsiynyy rozvytok [Analysis of the potential of the forest sector of Ukraine and identification of factors that inhibit its innovative development]. Kyiv, 39 p. [in Ukrainian].

Zvit pro stratehichnu ekolohichnu otsinku. Proekt natsionalʹnoho planu upravlinnya vidkhodamy do 2030 roku. [Strategic Environmental Assessment Report. Project of national waste management plan until 2030]. (2018). Kyiv. – 49 p. [in Ukrainian].

Matveev, Yu., Geletuha, G.G. (2019). Perspektyvy enerhetychnoyi utylizatsiyi tverdykh pobutovykh vidkhodiv v Ukrayini [Perspectives of energy utilization of solid waste in Ukraine]. Analytical note № 22. Kyiv, 48 p. [in Ukrainian].

Semenov, V.F., Mikhailyuk, O.L., Galushkina, T.P., Krusir, G.V. (2004). Ekolohichnyy menedzhment [Environmental Management]. Kyiv, 407 p. [in Ukrainian].

Rubanka, M.M., Miciats, V.P. (2015) Vidkhody lehkoyi promyslovosti, sposoby pererobky ta oblasti podalʹshoho vykorystannya [Light industry wastes, processing methods and areas of further use]. Bulletin of the KNUTD. Series “Technical Sciences”, №4 (88), 34-39. [in Ukrainian].

Pugachevskaya, S.M., Tkachenko, I.L., Boyko, E.V. (1987). Yspolʹzovanye otkhodov shveynoho proyzvodstva [Use of sewing production waste]. Kyiv, 407 p. [in Ukrainian].

Kartashova, V.I., Azanov, R.Z., Davletbaev, I.G. (2014). K voprosu yspolʹzovanyya tekstylʹnykh otkhodov shveynoho proyzvodstva yz syntetycheskykh volokon [On the issue of using sewing production textile waste of synthetic fibers]. Bulletin of Kazan Technological University. Kazan, 96-98. [in Russian].

Goncharenok, Yu.P., Groshev, I.M., Terentyeva E.A. (2009). Orhano-syntetycheskye voloknystye plyty sukhoho sposoba proyzvodstva [Dry-process organo-synthetic fiber boards]. Bulletin of Vitebsk State Technological University. Vitebsk, 14-17. [in Russian].

Netradytsyonnye puty yspolʹzovanyya otkhodov tekstylʹnoy promyshlennosty. [Non-traditional ways of using of textile industry waste] :https://vuzlit.ru/1304729/ netraditsionnye_puti_ispolzovaniya _othodov_tekstilnoy_promyshlennosti. [in Russian].

Kogan, A.G., Verbitskaya, Yu.P., Karpenya, A.M. (2012). Tekhnolohyya poluchenyya novykh vydov materyalov s yspolʹzovanyem otkhodov [Technology of new types materials with waste using]. Vitebsk, 32 p. [in Russian].

Martins, J., Klohn, T., Bianchi, O., Fiorio, R., Freire, E. (2010). Dynamic mechanical, thermal, and morphological study of ABS/textile fiber composites. Polymer Bulletin. 64. 497-510. 10.1007/s00289-009-0200-6.

Kamath, M., Bhat, G., Parikh, D.V., Mueller, D. (2005). Cotton Fiber Nonwovens for Automotive Composites. International Nonwovens Journal. 14. 34-40. 10.1177/1558925005os-1400105.

Gon, D., Das, K., Paul, P., Maity, S. (2012). Jute Composites as Wood Substitute. International Journal of Textile Science. 1. 84-93. 10.5923/j.textile.20120106.05.

DeVallance, D.B., Gray, J., Lentz, H. Properties of wood/recycled textile composite panels. (2012). Wood and Fiber Science. The Society of Wood Science and Technology. 44(3), 310-318.

Gayda S.V. (2013). Основи формування класифікатора вторинних деревинних ресурсів / Osnovy formuvannya klasyfikatora vtorynnykh derevynnykh resursiv [Bases of secondary wood resources classifier for-mation]. Scientific Works of the Forestry Academy 11:208-215 (in Ukrainian).

Gayda S.V. (2011). Вживана деревина – додатковий ресурс сировини / Vzhyvana derevyna – dodat-kovyy resurs syrovyny [Recovered wood is additional resource of raw material]. Forestry, Forest, Paper and Woodworking Industry 37(1): 238-244 (in Ukrainian).

Gayda, S.V., Maksymiv, V.M. (2007). Analiz, osoblyvosti, problemy ta dosvid vykorystannya dodatkovykh resursiv syrovyny – vidkhodiv ta vzhyvanoyi derevyny [Analysis, features, problems and experience of the use of additional resources of raw material – wastes and of used wood]. Forestry, Forest, Paper and Woodworking Industry 33:63-73 (in Ukrainian).

Gayda, S.V. (2007). Проблема деревної сировини у Європі та Україні / Problema derevnoyi syrovyny u Yevropi ta Ukrayini [А problem of arboreal raw material is in Europe and Ukraine]. Forestry, Forest, Paper and Woodworking Industry 33:55-63 (in Ukrainian).

Gayda S.V., Kiyko O.A. (2020). Determining the regime parameters for the surface cleaning of post-consumer wood by a needle milling tool. Eastern-European Journal of Enterprise Technologies, 5 (1(107)), 89-97. https://doi.org/10.15587/1729-4061.2020.212484.

Gayda S.V., Kiyko O.A. (2020). The investigation of properties of blockboards made of post-consumer wood. Poznan : Drewno, 63(206), 77-102. https://doi.org/10.12841/wood.1644-3985.352.10.

Gayda S.V. (2019). Scientific and technical basis of the use of used wood in woodworking: thesis of the Doctor of Technical Sciences in the specialty 05.23. – Lviv: UNFU. – 465 (in Ukrainian)