A investigation of technological processes of making beds of double different designs

S.V. Gayda; Ya.M. Bilyy; S.V. Voronovych

doi:10.36930/42194504

Authors

S.V. Gayda
Ya.M. Bilyy
S.V. Voronovych

DOI:

https://doi.org/10.36930/42194504

Keywords:

furniture, double bed, wood science & technology, bed backs, equipment, wood processing, form of stability, efficiency.

Abstract

The designs of double beds that are in demand by the population have been developed. The existing types of double bed backrests from a set of bedroom furniture made of natural wood and their technologies are analyzed. The technological processes of making backs of double beds are described. The technique of researches and comparison of technological processes of manufacturing of backs of double beds with the use of natural wood with design features is developed. A promising technological and production process for the production of double beds is offered. Selection of modern equipment of technological process for production of back of double beds is made. Comparison of technological processes of production of backs of double beds using natural wood with structural features is made. The necessary materials for making backs of double beds have been calculated. The necessary equipment has been calculated and workshop planning has been developed to technologically execute two variants of double beds. The efficiency of choosing one technological process for a particular type of double bed back has been calculated.

References

Gayda S.V. (2007). Проблема деревної сировини у Європі та Україні / Problema derevnoyi syrovyny u Yevropi ta Ukrayini [А problem of arboreal raw material is in Europe and Ukraine]. Forestry, Forest, Paper and Woodworking Industry 33:55-63 (in Ukrainian).

Gayda S.V. (2010) A comparative analysis of physical and mechanical parameters of variously designed glued boards made of post-consumer recovered wood. Forestry, Forest, Paper and Woodworking Industry 36:81-92.

Gayda S.V. (2011). Recycled of post-consumer wood is for the production of particleboard in Ukraine / Proceedings of the XXI International symposium Adhesives in Woodworking Industry (Slovakia, Zvolen Juve 29 – July 01. 2011). TU Zvolen. – P. 108-121.

Gayda S.V. (2011). The investigation of physical and mechanical properties of wood particleboards made from post-consumer wood. Forestry, Forest, Paper and Woodworking Industry 37(2).95-110.

Gayda S.V. (2011). Вживана деревина – додатковий ресурс сировини / Vzhyvana derevyna – dodat-kovyy resurs syrovyny [Recovered wood is additional resource of raw material]. Forestry, Forest, Paper and Woodworking Industry 37(1). 238-244 (in Ukrainian).

Gayda S.V. (2013). Osnovy formuvannya klasyfikatora vtorynnykh derevynnykh resursiv [Bases of sec-ondary wood resources classifier formation]. Scientific Works of the Forestry Academy of Sciences of Ukraine 11:208-215 (in Ukrainian).

Gayda S.V. (2013). Resursooshchadnі tekhnologії pereroblennya vzhivanoї derevini [Resource-saving technologies of recycling of post-consumer wood]. Scientific Bulletin of NULES of Ukraine: Technology and Energy of agroindustrial complex 185(2).271-280, (in Ukrainian).

Gayda S.V. (2013). Techniques for utilization of post-consumer wood in the production of fuel pellets and briquettes. Proceedings of the XXI International symposium Adhesives in Woodworking Industry (Slo-vakia, Zvolen Juve 23-26. 2013). TU Zvolen, 119-130.

Gayda S.V. (2013). Tekhnologії ta rekomendatsії do vikoristannya vzhivanoї derevini v derevoobroblennі [Technologies and recommendations on the utilization of post-consumer wood in woodworking industry]. Forestry, Forest, Paper and Woodworking Industry 39(1).48-67, (in Ukrainian).

Gayda S.V. (2013). Розроблення технології виробництва паливних гранул на основі енергетичного потенціалу вживаної деревини [Development of technology for the production of fuel pellets based on the energy potential of used wood]. Scientific Bulletin of UNFU 23.14:83-93. (in Ukrainian).

Gayda S.V. (2014). Sposoby podgotovki k pererabotke vtorichno ispol'zuyemoy drevesiny iglofrezernymi i shchotochnymi stankami [Preparation methods for processing of post-consumer wood (PCW) needle-milling and brushing machines]. Actual problems of forest complex 40:65-69 (in Russian).

Gayda S.V. (2014). Techniques for recycled of post-consumer wood in the production of quality parti-cleboard. Forestry, Forest, Paper and Woodworking Industry 40:41-51. doi: https://doi.org/10.36930/42144010

Gayda S.V. (2014). Teoreticheskoye obosnovaniye podkhoda po prognozirovaniyu prochnosti drevesnostruzhechnykh plit iz vtorichno ispol'zuyemoy drevesiny [The theoretical rationale for the approach on the prediction the strength of particleboard from recycled wood]. Actual problems of forest complex 38:212-216 (in Russian).

Gayda S.V. (2015). Issledovanie fiziko-mekhanicheskikh svoystv vtorichno ispol'zuemoy drevesiny [Inves-tigation of physical and mechanical properties of post-consumer wood]. Actual problems of forest complex 43:175-179, (in Russian).

Gayda S.V. (2015). Modeling properties of blockboards made of post-consumer wood on the basis of the finite ele-ment method. Forestry, Forest, Paper and Woodworking Industry 41:39-49. doi: https://doi.org/10.36930/42154106

Gayda S.V. (2015). Tekhnologicheskie osnovy pererabotki vtorichno ispol'zuemoy drevesiny [Technologi-cal of processing basics of post-consumer wood]. Actual directions of Scientific Research XXI century: Theory and Practice, Voronezh State Forestry Engineering University Named after G.F. Morozov 3(8-2 (19-2)). 82-86, (in Russian).

Gayda S.V. (2015). Tekhnologії і fіziko-mekhanіchnі vlastivostі stolyarnikh plit іz vzhivanoї derevini [Technology and physical and mechanical properties blockboard made of post-consumer wood]. Technical ser-vice of agriculture, forestry and transport systems 3(1).145-152, (in Ukrainian).

Gayda S.V. (2016). A investigation of form of stability of variously designed blockboards made of post-consumer wood. ProLigno 12(1).22-31.

Gayda S.V. (2016). Ekologo-tekhnologicheskiye aspekty pererabotki vtorichno ispol'zuyemoy drevesiny dlya proizvodstva pressovannykh materialov [Ecological and technological aspects of recycling post-consumer wood for production compacted materials]. Lesnoy vestnik / Forestry bulletin of MSFU 20(3).15-22 (in Rus-sian).

Gayda S.V. (2016). Formoustoychivost' stolyarnykh plit iz vtorichno ispol'zuemoy drevesin [A form of stability of blockboards made of post-consumer wood]. Actual problems of forest complex 46:148-153, (in Rus-sian).

Gayda S.V. (2017). Tekhnolohyya y svoystva mebelnoho shchyta yz vtorychno yspolzuemoy drevesyny [A technology and properties of furniture board (fb) made of post-consumer wood]. Actual problems of forest complex 48:34-38 (in Russian).

Gayda S.V. (2017). Використання нечітких експертних систем для підтримки прийняття рішень в процесі сортування вживаної деревини / Vykorystannya nechitkykh ekspertnykh system dlya pidtrymky pryynyattya rishenʹ v protsesi sortuvannya vzhyvanoyi derevyny [Using fuzzy expert systems for decision sup-port in the process of post-consumer wood sorting]. Forestry, Forest, Paper and Woodworking Industry 43:5-20 (in Ukrainian). doi: https://doi.org/10.36930/42174301

Gayda S.V. (2017). Комплексні дослідження зміни пружних властивостей вживаної деревини ялиці з віком / Kompleksni doslidzhennya zminy pruzhnykh vlastyvostey vzhyvanoyi derevyny yalytsi z vikom [The complex studies on the change of elastic properties of post-consumer fir wood with age]. Forestry, Forest, Pa-per and Woodworking Industry 43:58-72 (in Ukrainian). doi: https://doi.org/10.36930/42174308

Gayda S.V. (2018). A investigation and analysis of characteristics of solid furniture boards made of post-consumer wood. Forestry, Forest, Paper and Woodworking Industry, 44, 15-25. (in Ukrainian).

Gayda S.V. (2018). Mitsnist kombinovanykh stolyarnykh plyt iz vzhyvanoyi derevyny [Strength of combined blockboard made of post-consumer wood (PCW)]. Bulletin of KhNTUA 197:3-9 (in Ukrainian).

Gayda S.V. (2018). Strength of combined blockboard made of post-consumer wood (PCW). Bulletin of KhNTUA 197:3-9, (in Ukrainian).

Gayda S.V. (2018). Дослідження та аналіз характеристик щитових конструкцій із вживаної деревини / Doslidzhennya ta analiz kharakterystyk shchytovykh konstruktsiy iz vzhyvanoyi derevyny [A investigation and analysis of characteristics of solid furniture boards made of post-consumer wood]. Forestry, Forest, Paper and Woodworking Industry 44:14-24 (in Ukrainian). doi: https://doi.org/10.36930/42184402

Gayda S.V. (2018). Технологія МДФ-фасадів / Tekhnolohiyi MDF-Fasadiv [MDF Facade Technolo-gies]. Forestry, Forest, Paper and Woodworking Industry 44:70-83 (in Ukrainian). doi: https://doi.org/10.36930/42184410

Gayda S.V. (2019). Naukovo-tekhnichni osnovy vykorystannya vzhyvanoyi derevyny v derevoobrobtsi [Scientific and technical basis of post-consumer wood use in woodworking]: dissertation of the Doctor of Technical Sciences, specialty 05.23.06 – woodworking technology, furniture making and wood products manufacturing. – Lviv: Ukrainian National Forestry University. – 465 p., (in Ukrainian).

Gayda S.V. Kiyko O.A. (2018). Formostiykist yak kryteriy yakosti stolyarnykh plyt iz vzhyvanoyi derevyny [Shape stability as a quality criterion for PCW-made blockboards]. Scientific Works of the Forestry Academy of Sciences of Ukraine 17:185-192 (in Ukrainian).

Gayda S.V. (2011). Recycled of post-consumer wood is for the Productsion of particleboard in Ukraine. Adhesives in Woodworking Industry: proceedings of the XXth International Symposium, Technical university of Zvolen:108-121.

Gayda S.V., Bilyy Ya.M. (2016). The investigation of the shape stability of glued panels made of post-consumer wood. Forestry, Forest, Paper and Woodworking Industry, 42, 69-79. (in Ukrainian).

Gayda S.V., Dyak T.P. (2011). The analysis of economic efficiency of post-consumer wood use for par-ticleboard manufacture for LLC Swisspan Limited // Forestry, Forest, Paper and Woodworking Industry 37.2:129-136. doi: https://doi.org/10.36930/421137221

Gayda S.V., Kiyko O.A. (2013). Технология очистки вторично используемой древесины иглофрезерными станками [The technology of cleaning recycled wood with needle milling machines] // Actual prob-lems and prospects of the development of LPK: II NTK., 9-11.0913 – Kostroma. – P. 36-39. (in Russian).

Gayda S.V., Kiyko O.A. (2018). Shape stability as a quality criterion for PCW-made blockboards. Pro-ceedings of the Forestry Academy of Sciences of Ukraine, 17, 185-192. https://doi.org/10.15421/411834 (in Ukrainian)

Gayda S.V., Maksimiv V.M., Kiyko O.A., Ferenc O.B. (2013). Залишки деревини та деревина після споживання. Класифікація. Терміни та визначення [Wood residues and post-consumer wood. Classification. Terms and definitions] / Agreement No. 08.24-11-1: draft international standard ISO. – Lviv: NLTU of Ukraine – 53 p. (in Ukrainian).

Gayda S.V., Voronovich V.V. (2011). Issledovanie osobennostey gnut'ya vtorichno ispol'zuemoy drevesiny [Investigation of the features of bending of post-consumer wood]. Scientific progress – creative young: proceedings of the International Scientific Conference, Mari State University: 190-192 (in Russian).

Gayda S.V., Voronovich V.V. (2011). Порівняльний аналіз гнуття вживаної деревини різних порід та вікових категорій / Porіvnyal'niy analіz gnuttya vzhivanoї derevini rіznikh porіd ta vіkovikh kategorіy [Comparative analysis of bending particularities for various post-consumer wood species and age categories]. Forestry, Forest, Paper and Woodworking Industry 37(1). 84-88 (in Ukrainian).

Gayda S.V., Ya.M. Bilyy (2016). Doslidzhennya formostiykosti kleyenykh shchytiv iz vzhyvanoyi derevyny [The investigation of the shape stability of glued panels made of post-consumer wood]. Forestry, Forest, Paper and Woodworking Industry 42: 69-79 (in Ukrainian). doi: https://doi.org/10.36930/42164211

Gayda S.V. (2013). The technological solutions for recycling of post-consumer wood. Proceedings of I International Interdisciplinary Scientific Conference Formation of stable outlook as the basis of sustainable development (Ukraine, Lviv, 14-16 March 2013) UNFU: Lviv, 5-11.

Gayda, S.V. (2007). Матеріали для виготовлення виробів з деревини / Навч. посібн. – Львів: ВМС. – 160 с. (in Ukrainian).