Analysis of implementation of industry 4.0 principles in furniture production
DOI:
https://doi.org/10.36930/42234906Keywords:
furniture production, robotics, flexible systems, technologies, processing centers, Industry 4.0, artificial intelligence, Internet of Things, used wood, blanks, parts, furniture board, joiner plate.Abstract
It is substantiated that the implementation of the principles of Industry 4.0 in the furniture industry will be able to significantly improve the competitiveness and efficiency of the enterprise, in particular, the replacement of workers with automated equipment in the manufacture of furniture will be able to increase the productivity and quality of production. It was found that the use of industrial robots and automated equipment can significantly reduce labor costs and increase production speed, and the introduction of sensors and their connection to the Internet can help monitor the condition of equipment, measure productivity and forecast maintenance needs. It was analyzed that the obtained data on production and interaction with clients will help in improving production processes and forecasting the demand for furniture products, and the use of virtual and augmented reality can significantly simplify the furniture design process and allow ideas to be implemented faster. It was found that the introduction of flexible production systems will allow to quickly switch to production between different types of furniture and respond to changes in demand. Also, the use of technological robots will be able to help reduce labor costs, especially in the face of growing demands for wages and labor shortages. It was found that the combination of physical and virtual systems will allow control and optimization of production processes in real time, and the use of machine learning algorithms for the analysis of large volumes of data can help identify and eliminate problems in furniture production, automate most production processes and reduce costs on the labor force. It is suggested to train personnel in advance for the introduction of new technologies - processing centers, technological robots, as this will help to ensure the successful and rapid implementation of the principles of Industry 4.0. Thus, robotics is a key element for the implementation of Industry 4.0 principles in furniture production, as it allows to increase the efficiency, quality and competitiveness of production.
References
Gayda S.V. (2019). Scientific and technical basis of the use of used wood in woodworking: thesis of the Doctor of Technical Sciences in the specialty 05.23. – Lviv: UNFU. – 465 (in Ukraini-an).
Gayda S.V. (2015): Modeling properties of blockboards made of post-consumer wood on the basis of the finite element method. Forestry, Forest, Paper and Woodworking Industry 41:39-49.
Gayda S.V. (1999): Проблеми та перспективи роботизації меблевої промисловості / Problemy ta perspektyvy robotyzatsiyi meblevoyi promyslovosti [Problems and prospects of robotics in the furniture industry]. Collection Bulletin UNFU, Lviv. Vol. 9(5):192-194, (in Ukrainian).
Gayda, S.V. (2010). A comparative analysis of physical and mechanical parameters of vari-ously designed glued boards made of post-consumer recovered wood. Forestry, Forest, Paper and Woodworking Industry 36:81-91.
Gayda S.V., Kiyko O.A. (2018): Формостійкість як критерій якості столярних плит із ВЖД / Formostiykistʹ yak kryteriy yakosti stolyarnykh plyt iz vzhyvanoyi derevyny [Shape stability as a quality criterion for PCW-made blockboards]. Scientific Works of the Forestry Academy of Sci-ences of Ukraine 17:185-192 (in Ukrainian).
Gayda S.V. (2002): Особливості та перспективи роботизації меблевої промисловості Ук-раїни / Osoblyvosti ta perspektyvy robotyzatsiyi meblevoyi promyslovosti Ukrayiny [Peculiarities and prospects of robotization of the furniture industry of Ukraine]. Collection Bulletin UNFU, Lviv. Vol. 12(5):38-40, (in Ukrainian).
Gayda S.V. (2018). Технологія МДФ-фасадів / Tekhnolohiyi MDF-Fasadiv [MDF Facade Technologies]. Forestry, Forest, Paper and Woodworking Industry 44:70-83 (in Ukrainian). doi: https://doi.org/10.36930/42184410
Gayda S.V. (2017): A technology and properties of furniture board (FB) made of post-consumer wood (PCW). Actual problems of forest complex 48:34-38 (in Russian).
Gayda S.V., Maksymiv V.M. From recycled post-consumer wood towards prime quality parti-cleboard / Ліс. госп-во, ліс., папер. та деревооб. пром-сть // міжвід. наук.-техн. зб. – Львів: НЛТУ України. – 2010, вип. 36. – С. 57-77.
Gayda S.V. (2023). Determination of the circularity indicator in the forest sector according to the principles of the circular economy. Forestry, Forest, Paper and Woodworking Industry, 49, 99-114. https://doi.org/10.36930/42234908 (in Ukrainian).
Gayda S.V. (2013): Ресурсоощадні технології перероблення вживаної деревини / Resur-sooshchadnі tekhnologії pereroblennya vzhivanoї derevini [Resource-saving technologies of recy-cling of post-consumer wood]. Scientific Bulletin of NULES of Ukraine: Technology and Energy of agroindustrial complex 185(2):271-280, (in Ukrainian).
Grytsak S.A., Gayda S.V., Kushpit A.S., Salapak L.V. (2023). Analysis of the efficiency of structural and technological solutions in the production of component units of lattice furniture products. Forestry, Forest, Paper and Woodworking Industry 49: 61-72, (in Ukrainian). doi: https://doi.org/10.36930/42234905
Gayda S.V. (2014): Techniques for recycled of post-consumer wood in the production of quality particleboard. Forestry, Forest, Paper and Woodworking Industry 40:41-51.
Gayda S.V. (2015): Issledovanie fiziko-mekhanicheskikh svoystv vtorichno ispol'zuemoy drevesiny [Investigation of physical and mechanical properties of post-consumer wood]. Actual prob-lems of forest complex 43:175-179, (in Russian).
Gayda S.V. (2016): Research on physical and mechanical characteristics of front blockboards made from post-consumer wood [Дослідження фізико-механічних характеристик фасадних столярних плит із вживаної деревини]. Forestry, Forest, Paper and Woodworking Industry 42: 33-50. doi: https://doi.org/10.36930/42164206
Gayda S.V. (2016): Технологічні підходи до поверхневого очищення вживаної деревини голкофрезерним інструментом / Tekhnolohichni pidkhody do poverkhnevoho ochyshchennya vzhyvanoyi derevyny holkofrezernym instrumentom [Technological approaches to cleaning of surface of post-consumer wood of needle-milling tools]. Bulletin of KhNTUA 178:3-11, (in Ukrainian).
Gayda S.V. (2016): Эколого-технологические аспекты переработки вторично исполь-зуемой древесины для производства прессованных материалов. Ekologo-tekhnologicheskiye aspekty pererabotki vtorichno ispol’zuyemoy drevesiny dlya proizvodstva pressovannykh materialov [Ecological and technological aspects of recycling post-consumer wood for production compacted materials]. Lesnoy vestnik / Forestry bulletin of MSFU 20(3):15-22, (in Russian).
Gayda S.V. (2017): Використання нечітких експертних систем для підтримки прийняття рішень в процесі сортування вживаної деревини / Vykorystannya nechitkykh ekspertnykh system dlya pidtrymky pryynyattya rishenʹ v protsesi sortuvannya vzhyvanoyi derevyny [Using fuzzy expert systems for decision support in the process of post-consumer wood sorting]. Forestry, Forest, Paper and Woodworking Industry 43:5-20 (in Ukrainian). doi: https://doi.org/10.36930/42174301
Gayda S.V. (2018): Mitsnist kombinovanykh stolyarnykh plyt iz vzhyvanoyi derevyny [Strength of combined blockboard made of post-consumer wood (PCW)]. Bulletin of KhNTUA 197:3-9, (in Ukrainian).
Gayda S.V. (2018): Дослідження та аналіз характеристик щитових конструкцій із вжи-ваної деревини / Doslidzhennya ta analiz kharakterystyk shchytovykh konstruktsiy iz vzhyvanoyi derevyny [A investigation and analysis of characteristics of solid furniture boards made of post-consumer wood]. Forestry, Forest, Paper and Woodworking Industry 44:15-25, (in Ukrainian). doi: https://doi.org/10.36930/42184402
Gayda S.V. (2023). State and analysis of the dynamics indicators of the production volume of the woodworking and furniture industry. Forestry, Forest, Paper and Woodworking Industry 49: 4-19 (in Ukrainian). doi: https://doi.org/10.36930/42234901
Orikhovskyy R.Ya., Gayda S.V. (2020). The influence of different parameters of stability of production sites on the efficiency of functioning of woodworking production. Forestry, Forest, Paper and Woodworking Industry 46:49-53 (in Ukrainian). doi: https://doi.org/10.36930/42204605
Gayda S.V. (2004). Інтегровані технології меблевого виробництва [Integrated technologies of furniture production]. Scientific Bulletin of UNFU 14.4:118-121. (in Ukrainian).
Gayda S.V. (2020) : Аналіз конструкцій та технологій виготовлення сучасних меблевих фасадів / Analiz konstruktsiy ta tekhnolohiy vyhotovlennya suchasnykh meblevykh fasadiv [Analysis of structures and technologies of manufacture of modern furniture facades]. Forestry, Forest, Paper and Woodworking Industry 46:54-64, (in Ukrainian). doi: https://doi.org/10.36930/42204606
Gayda S.V. (2003). Гнучкі виробничі модулі для виготовлення ґратчастих меблевих ви-робів [Flexible production modules for the production of lattice furniture products]. Scientific Bulletin of UNFU 13.2:120-122. (in Ukrainian).
Gayda S.V., Bilyy Ya.M., Voronovych S.V. (2019): Дослідження технологічних процесів виготовлення ліжок двоспальних різних конструкцій / Doslidzhennya tekhnolohichnykh protsesiv vyhotovlennya lizhok dvospalʹnykh riznykh konstruktsiy [A investigation of technological processes of making beds of double different designs]. Forestry, Forest, Paper and Woodworking Industry 45:22-31, (in Ukrainian). doi: https://doi.org/10.36930/42194504
Gayda S.V., Ilkiv M.M., Savka D.B. (2021) : Дослідження технологічних процесів виго-товлення меблевих фасадів з масивної деревини // Doslidzhennya tekhnolohichnykh protsesiv vyhotovlennya meblevykh fasadiv z masyvnoyi derevyny. [Research of technological processes of manufacture of meble facades from solid wood]. Forestry, Forest, Paper and Woodworking Industry 47:22-33, (in Ukrainian). doi: https://doi.org/10.36930/42214703
Gayda S.V., Kiyko O.A. (2021): Властивості вживаної деревини як визначальний чин-ник якості меблевих виробів / Vlastyvosti vzhyvanoyi derevyny yak vyznachalʹnyy chynnyk yakosti meblevykh vyrobiv [Properties of used wood as a determining factor in the quality of furniture prod-ucts]. Scientific Works of the Forestry Academy of Sciences of Ukraine 23:152-162, (in Ukrainian). https://doi.org/10.15421/412135
Gayda S.V., Kshyvetskyy B.Ya. (1999). Техніко-економічні характеристики деревообро-бної фабрики майбутнього [Technical and economic characteristics of the woodworking factory of the future]. Scientific Bulletin of UNFU 9.3:83-85. (in Ukrainian).
Gayda S.V., Lesiv L.E. (2019): Визначення та порівняння властивостей вживаної дереви-ни основних хвойних порід / Vyznachennya ta porivnyannya vlastyvostey vzhyvanoyi derevyny os-novnykh khvoynykh porid [A determination and comparison of properties of post-consumer wood of the basic conifers]. Forestry, Forest, Paper and Woodworking Industry 45:39-46, (in Ukrainian). doi: https://doi.org/10.36930/42194506
Gayda S.V., Voronovich V.V. (2011): Issledovanie osobennostey gnut'ya vtorichno ispol'zue-moy drevesiny [Investigation of the features of bending of post-consumer wood]. Scientific progress – creative young: proceedings of the International Scientific Conference, Mari State University: 190-192, (in Russian).
Gayda S.V., Bilyy Ya.M. (2019). Дослідження технологічних процесів виготовлення лі-жок двоспальних різних конструкцій / Doslidzhennya tekhnolohichnykh protsesiv vyhotovlennya lizhok dvospalʹnykh riznykh konstruktsiy [A investigation of technological processes of making beds of double different designs]. Forestry, Forest, Paper and Woodworking Industry 45:21-31 (in Ukrain-ian). doi: https://doi.org/10.36930/42194504
Gayda S.V., Voytovych I.G. (2017): Дослідження міцності та стійкості елементів ґрат-частих меблевих виробів із вживаної деревини / Doslidzhennya mitsnosti ta stiykosti elementiv gratchastykh meblevykh vyrobiv iz vzhyvanoyi derevyny [Durability and stability of elements for beam furniture products made from post-consumer wood are investigated]. Bulletin of KhNTUA 189:62-70, (in Ukrainian).
Gayda S.V., Voytovych I.G., Orikhovskyy R.Ya. (2020) : Дослідження технологічних процесів виготовлення ніжок столів обідніх різних конструкцій / Doslidzhennya tekhnolohichnykh protsesiv vyhotovlennya nizhok stoliv obidnikh riznykh konstruktsiy [Research of technological processes of production of legs of tables of various designs]. Forestry, Forest, Paper and Woodworking Industry 46:36-49, (in Ukrainian). doi: https://doi.org/10.36930/42204604
Gayda, S., Kiyko, O. (2020): The investigation of properties of blockboards made of post-consumer wood. Drewno. Prace Naukowe, Doniesienia, Komunikaty = Wood. Research Papers, Reports, Announcements, 63(206), 77-102. https://doi.org/10.12841/wood.1644-3985.352.10
Gayda, S., Kiyko, O. (2023): Study of Physical and Mechanical Properties of Post-Consumer Wood of Different Age. Drewno. Prace Naukowe, Doniesienia, Komunikaty = Wood. Research Papers, Reports, Announcements, 66(212), doi: https://doi.org/10.53502/wood-177453
Gayda, S.V. (2007): Дослідження концентрації операцій у сучасному меблевому вироб-ництві / Doslidzhennya kontsentratsiyi operatsiy u suchasnomu meblevomu vyrobnytstvi [Research of concentration of operations is in modern furniture Productsion]. Forestry, Forest, Paper and Woodworking Industry 33:73-79 (in Ukrainian).
Gayda, S.V., Kiyko O.A., Guz M.M. (2022): Research of the structure of stump and root-wood for effective use in the production of wood products. Folia Forestalia Polonica, Series A – For-estry, 64 (3):131-142, doi: https://doi.org/10.2478/ffp-2022-0011
Gayda, S.V., Kiyko, O.A. (2020): Determining the regime parameters for the surface cleaning of post-consumer wood by a needle milling tool. Eastern-European Journal of Enterprise Technologies, 5 [1 [107]], 89–97. doi: https://doi.org/10.15587/1729-4061.2020.212484.
Grytsak S.A., Gayda S.V. (2020): Порівняльний аналіз фізико-механічних характерис-тик гнутих елементів із різних порід дерев / Porivnyalʹnyy analiz fizyko-mekhanichnykh kharakterystyk hnutykh elementiv iz riznykh porid derev [Comparative analysis of physical and mechanical characteristics of bent elements from different tree species]. Forestry, Forest, Paper and Woodworking Industry 46:16-27, (in Ukrainian). doi: https://doi.org/10.36930/42204602
Orikhovskyy R.Ya. (2021): Оцінювання втрат робочого часу у виробничих системах і стабільності роботи автоматичних ліній у галузі деревообробці / Otsinyuvannya vtrat robochoho chasu u vyrobnychykh systemakh i stabilʹnosti roboty avtomatychnykh liniy u haluzi derevoobrobtsi [The estimation of losses of working time in production systems and work stability of automatic lines in the field of woodworking]. Forestry, Forest, Paper and Woodworking Industry 47:16-21 (in Ukrainian). doi: https://doi.org/10.36930/42214702
Orikhovskyy R.Ya., Gayda S.V. (2020): Вплив різних параметрів стабільності виробни-чих дільниць на ефективність функціонування деревообробного виробництва / Vplyv riznykh parametriv stabilʹnosti vyrobnychykh dilʹnytsʹ na efektyvnistʹ funktsionuvannya derevoobrobnoho vyrobnytstva [The influence of different parameters of stability of production sites on the efficiency of functioning of woodworking production]. Forestry, Forest, Paper and Woodworking Industry 46:49-53 (in Ukrainian). doi: https://doi.org/10.36930/42204605
Downloads
Published
Issue
Section
How to Cite
