Вплив розміщення структурних елементів клеєних щитів на їх формостійкість

Ірина Кійко

doi:10.36930/

Authors

I.O. Kiyko Ukrainian National Forestry University

DOI:

https://doi.org/10.36930/

Keywords:

furniture boards made from wooden wastes, deviation from flatness, parallel and perpendicular schemes of structural elements placement.

Abstract

Furniture boards made from wooden wastes have a number of the significant economic and environmental benefits in relation to their use in furniture and woodworking industries in comparison to the usual furniture boards made from wooden timber which are connecting into furniture boards in size of length using finger ironings and in size to the width – using adhesive on the smooth puffer. One of the possible disadvantages of the furniture boards made from structural elements of small size is a deviation from flatness that sometimes exceeds the permissible value. Comparison of deviation from flatness of furniture boards with directions along and across the fibers for two different schemes for placement of structural elements – parallel and perpendicular was done. Conclusion about better shape stability for the furniture boards, in which there is perpendicular scheme of the structural elements’ location, was suggested

References

Kiyko, I. (2013) Defining the role of wood and wood-based materials in furniture manufac-ture based on sociological research. Forestry, Forest, Paper And Woodworking Industry, 39.1, 113-117.

Kiyko, I. (2013) Possibilities of the woodworking industry’s wastes using for manufacturing of the furniture boards with improved aesthetic properties. Proceedings of the XXI International symposium Adhesives in Woodworking Industry (Slovakia, Zvolen Juve 23-26. 2013). TU Zvolen, 107-112.

Kiyko, I. (2014) Impact of the structural element’s sizes on the furniture board’s form stabil-ity. Scientific Bulletin of the UNFU, 22.12.

Gayda S.V. (2014): Teoreticheskoye obosnovaniye podkhoda po prognozirovaniyu prochnosti drevesnostruzhechnykh plit iz vtorichno ispol'zuyemoy drevesiny [The theoretical rationale for the approach on the prediction the strength of particleboard from recycled wood]. Actual problems of forest complex 38:212-216 (in Russian).

Gayda S.V. (2013): Tekhnologії ta rekomendatsії do vikoristannya vzhivanoї derevini v derevoobroblennі [Technologies and recommendations on the utilization of post-consumer wood in woodworking industry]. Forestry, Forest, Paper and Woodworking Industry 39(1):48-67, (in Ukr.).

Gayda S.V. (2011): The investigation of physical and mechanical properties of wood parti-cleboards made from post-consumer wood. Forestry, Forest, Paper and Woodworking Industry 37(2):95-110.

Gayda, S., Dyak, T. (2011) The analysis of economic efficiency of post-consumer wood use for particleboard manufacture for LLC Swisspan Limited. Forestry, Forest, Paper and Wood-working Industry, 37.2, 129-136.