ЗАБЕЗПЕЧЕННЯ ФОРМОСТІЙКОСТІ ДЕРЕВИННИХ КОМПОЗИТНИХ ЗАГОТОВОК У ВИРОБНИЦТВІ ВИРОБІВ З ДЕРЕВИНИ

Володимир Атаманюк; Ярослав Білий

doi:10.36930/42174303

Authors

V.M. Atamanyuk https://orcid.org/0000-0002-8707-2319
Ya.M. Bilyy

DOI:

https://doi.org/10.36930/42174303

Keywords:

shape stability, gutting, calibration, lustration, endurance, furniture production, humidity, workpiece, panel elements.

Abstract

The factors that affect the uniformity of panel workpieces are substantiated. The influence of the thickness of the removed layer from the surface of the workpiece on the process of form-resistance of the shield elements during the calibration, capping and endurance in a dense foot is investigated. It is verified and proved the influence of the veneer moisture on the shape resistance of the shield billets of furniture furniture products in the process of exposure to MDF. The graphical dependence of the deviation from the flatness of the shield blanks, screwed with veneer planed, from the time of exposure in a dense foot is obtained.

References

Gayda S.V. (2016): A investigation of form of stability of variously designed blockboards made of post-consumer wood. ProLigno 12(1):22-31.

Gayda S.V., Voytovych I.G. (2017): Дослідження міцності та стійкості елементів ґратчастих меб-левих виробів із вживаної деревини / Doslidzhennya mitsnosti ta stiykosti elementiv gratchastykh meblevykh vyrobiv iz vzhyvanoyi derevyny [Durability and stability of elements for beam furniture products made from post-consumer wood are investigated]. Bulletin of KhNTUA 189:62-70 (in Ukrainian).

Gayda S.V. (2017): Tekhnologiya i svoystva mebel'nogo shchita iz vtorichno ispol'zuemoy drevesiny [A technology and properties of furniture board made of post-consumer wood]. Actual problems of forest complex 48:34-38, (in Russian).

Gayda S.V. (2016): Технологічні підходи до поверхневого очищення вживаної деревини голко-фрезерним інструментом / Tekhnolohichni pidkhody do poverkhnevoho ochyshchennya vzhyvanoyi derevyny holkofrezernym instrumentom [Technological approaches to cleaning of surface of post-consumer wood of needle-milling tools]. Bulletin of KhNTUA 178:3-11 (in Ukrainian).

Gayda S.V., Ya.M. Bilyy (2016): Дослідження формостійкості клеєних щитів із вживаної дереви-ни / Doslidzhennya formostiykosti kleyenykh shchytiv iz vzhyvanoyi derevyny [The investigation of the shape stability of glued panels made of post-consumer wood]. Forestry, Forest, Paper and Woodworking Industry 42: 69-79 (in Ukrainian).

Gayda S.V. (2016): Research on physical and mechanical characteristics of front blockboards made from post-consumer wood [Дослідження фізико-механічних характеристик фасадних столярних плит із вживаної деревини]. Forestry, Forest, Paper and Woodworking Industry 42: 33-50.

Gayda S.V. (2016): Formoustoychivost' stolyarnykh plit iz vtorichno ispol'zuemoy drevesin [A form of stability of blockboards made of post-consumer wood]. Actual problems of forest complex 46:148-153, (in Russian).

Gayda S.V. (2016): Ekologo-tekhnologicheskiye aspekty pererabotki vtorichno ispol'zuyemoy drevesiny dlya proizvodstva pressovannykh materialov [Ecological and technological aspects of recycling post-consumer wood for production compacted materials]. Lesnoy vestnik / Forestry bulletin of MSFU 20(3):15-22 (in Russian).

Gayda S.V. (2015): Modeling properties of blockboards made of post-consumer wood on the basis of the finite element method. Forestry, Forest, Paper and Woodworking Industry 41:39-49.

Gayda S.V. (2015): Issledovanie fiziko-mekhanicheskikh svoystv vtorichno ispol'zuemoy drevesiny [Investigation of physical and mechanical properties of post-consumer wood]. Actual problems of forest complex 43:175-179, (in Russian).

Gayda S.V. (2014): Techniques for recycled of post-consumer wood in the production of quality particleboard. Forestry, Forest, Paper and Woodworking Industry 40:41-51.

Gayda S.V. (2014): Teoreticheskoye obosnovaniye podkhoda po prognozirovaniyu prochnosti drevesnostruzhechnykh plit iz vtorichno ispol'zuyemoy drevesiny [The theoretical rationale for the approach on the prediction the strength of particleboard from recycled wood]. Actual problems of forest complex 38:212-216 (in Russian).

Gayda S.V. (2013): Resursooshchadnі tekhnologії pereroblennya vzhivanoї derevini [Resource-saving technologies of recycling of post-consumer wood]. Scientific Bulletin of NULES of Ukraine: Technology and Energy of agroindustrial complex 185(2):271-280, (in Ukrainian).

Gayda S.V. (2013): Tekhnologії ta rekomendatsії do vikoristannya vzhivanoї derevini v derevoobroblennі [Technologies and recommendations on the utilization of post-consumer wood in woodworking industry]. Forestry, Forest, Paper and Woodworking Industry 39(1):48-67, (in Ukrainian).

Gayda S.V. (2012): Production techniques and properties of fuel pellets produced from post-consumer wood // Forestry, Forest, Paper and Woodworking Industry. 38: 112-150.

Gayda, S., Dyak, T. (2011): The analysis of economic efficiency of post-consumer wood use for particleboard manufacture for LLC Swisspan Limited // Forestry, Forest, Paper and Woodworking Industry. 37.2:129-136.

Koryachko V.A., Kushpit A.S., Kushpit O.M., Andrashek Yo.V. (2016): The study of the blockboard shape stability depending on the design. Forestry, Forest, Paper and Woodworking Industry 42: 28-33.