АНАЛІЗ СУЧАСНИХ ТЕХНОЛОГІЙ ЛИЧКУВАННЯ КРАЙОК ЩИТІВ

Ярослав Білий; Іван Войтович; Іван Грабар

doi:10.36930/42174305

Authors

Ya.M. Bilyy Ukrainian National Forestry University
I.G. Voytovych Ukrainian National Forestry University
I.G. Grabar Polissia National University https://orcid.org/0000-0002-7193-6960

DOI:

https://doi.org/10.36930/42174305

Keywords:

technology, shields, methodology, facing, facing materials.

Abstract

A detailed analysis of the technological processes of touching the edges of the shield elements with the use of various lychello material on different technological equipment has been carried out. The technology of the faces of the edges of the shield elements is analyzed. A comparative analysis of the three technological processes of touching the edges of the panel elements has been fulfilled. The general methodology of researches of technological processes of facelift of edges of shield elements is developed. Materials for three types of castings of shield parts are calculated. The basic equipment according to the developed manufacturing technologies for the three variants of touching the edges of the panel elements is calculated. Three plans of shops have been developed. The analysis of the load of equipment for each variant of touching the edges of panel elements is carried out. The rational technologies of touching the edges of panel elements are selected based on the results of partial economic efficiency. It is recommended to introduce the optimal version number 3 of the technological process of rubbing the edges at the price of equipment 273 thousand UAH, the number of employees at the site of 5 people, and the capacity of equipment 15.9 kW.

References

Gayda S.V. (2005): Lichkіvka dlya meblіv: materіali, tehnologії, obladnannya [Facing for furniture: materials, technology, possession]. Allukrainian galuzeva newspaper "Derevoobrobnik" 18(1): 5-7, (in Ukrainian).

Gayda S.V. (2006): Progressive lichkuvalne ustatkuvannya quod perspektivnі tehnologіchnі rіshennya in virobnitstvі meblіv [Progressive facing equipment and promising technological solutions in the production of furniture]. Meblevі tekhnologії / Magazine 23: 54-58, (in Ukrainian).

Gayda, S., Dyak, T. (2011): The analysis of economic efficiency of post-consumer wood use for particleboard manufacture for LLC Swisspan Limited // Forestry, Forest, Paper and Woodworking Industry. 37.2:129-136.

Gayda S.V. (2014): Techniques for recycled of post-consumer wood in the production of quality particleboard. Forestry, Forest, Paper and Woodworking Industry 40:41-51.

Gayda S.V. (2014): Teoreticheskoye obosnovaniye podkhoda po prognozirovaniyu prochnosti drevesnostruzhechnykh plit iz vtorichno ispol'zuyemoy drevesiny [The theoretical rationale for the approach on the prediction the strength of particleboard from recycled wood]. Actual problems of forest complex 38:212-216 (in Russian).

Gayda S.V. (2013): Tekhnologії ta rekomendatsії do vikoristannya vzhivanoї derevini v derevoobroblennі [Technologies and recommendations on the utilization of post-consumer wood in woodworking industry]. Forestry, Forest, Paper and Woodworking Industry 39(1):48-67, (in Ukrainian).

Gayda S.V. (2012): Production techniques and properties of fuel pellets produced from post-consumer wood // Forestry, Forest, Paper and Woodworking Industry. 38: 112-150.

Gayda S.V. (2016): Технологічні підходи до поверхневого очищення вживаної деревини голкофрезерним інструментом / Tekhnolohichni pidkhody do poverkhnevoho ochyshchennya vzhyvanoyi derevyny holkofrezernym instrumentom [Technological approaches to cleaning of surface of post-consumer wood of needle-milling tools]. Bulletin of KhNTUA 178:3-11 (in Ukrainian).

Gayda S.V. (2016): Research on physical and mechanical characteristics of front blockboards made from post-consumer wood [Дослідження фізико-механічних характеристик фасадних сто-лярних плит із вживаної деревини]. Forestry, Forest, Paper and Woodworking Industry 42: 33-50.

Gayda S.V., Ya.M. Bilyy (2016): Дослідження формостійкості клеєних щитів із вживаної деревини / Doslidzhennya formostiykosti kleyenykh shchytiv iz vzhyvanoyi derevyny [The investigation of the shape stability of glued panels made of post-consumer wood]. Forestry, Forest, Paper and Woodworking Industry 42: 69-79 (in Ukrainian).

Gayda S.V. (2016): Formoustoychivost' stolyarnykh plit iz vtorichno ispol'zuemoy drevesin [A form of stability of blockboards made of post-consumer wood]. Actual problems of forest complex 46:148-153, (in Russian).

Gayda S.V. (2016): Ekologo-tekhnologicheskiye aspekty pererabotki vtorichno ispol'zuyemoy drevesiny dlya proizvodstva pressovannykh materialov [Ecological and technological aspects of recycling post-consumer wood for production compacted materials]. Lesnoy vestnik / Forestry bulletin of MSFU 20(3):15-22 (in Russian).

Gayda S.V., Voytovych I.G. (2017): Дослідження міцності та стійкості елементів ґрат-частих меблевих виробів із вживаної деревини / Doslidzhennya mitsnosti ta stiykosti elementiv gratchastykh meblevykh vyrobiv iz vzhyvanoyi derevyny [Durability and stability of elements for beam furniture products made from post-consumer wood are investigated]. Bulletin of KhNTUA 189:62-70 (in Ukrainian).

Gayda S.V. (2017): Tekhnologiya i svoystva mebel'nogo shchita iz vtorichno ispol'zuemoy drevesiny [A technology and properties of furniture board made of post-consumer wood]. Actual problems of forest complex 48:34-38, (in Russian).

Gayda S.V. (2015): Modeling properties of blockboards made of post-consumer wood on the basis of the finite element method. Forestry, Forest, Paper and Woodworking Industry 41:39-49.

Gayda S.V. (2015): Issledovanie fiziko-mekhanicheskikh svoystv vtorichno ispol'zuemoy drevesiny [Investigation of physical and mechanical properties of post-consumer wood]. Actual problems of forest complex 43:175-179, (in Russian).

Gayda S.V. (2013): Osnovy formuvannya klasyfikatora vtorynnykh derevynnykh resursiv [Bases of secondary wood resources classifier formation]. Scientific Works of the Forestry Academy of Sciences of Ukraine 11:208-215 (in Ukrainian).

Gayda S.V. (2011): Vzhyvana derevyna – dodatkovyy resurs syrovyny [Recovered wood is additional resource of raw material]. Forestry, Forest, Paper and Woodworking Industry 37(1): 238-244 (in Ukrainian).

Gayda S.V. (2011): The investigation of physical and mechanical properties of wood particleboards made from post-consumer wood. Forestry, Forest, Paper and Woodworking Industry 37(2):95-110.

Gayda S.V. (2010) A comparative analysis of physical and mechanical parameters of variously designed glued boards made of post-consumer recovered wood. Forestry, Forest, Paper and Woodworking Industry 36:81-92.

Gayda S.V. (2015): Tekhnologії і fіziko-mekhanіchnі vlastivostі stolyarnikh plit іz vzhivanoї derevini [Technology and physical and mechanical properties blockboard made of post-consumer wood]. Technical service of agriculture, forestry and transport systems 3(1):145-152, (in Ukrainian).

Gayda S.V. (2015): Tekhnologicheskie osnovy pererabotki vtorichno ispol'zuemoy drevesiny [Technological of processing basics of post-consumer wood]. Actual directions of Scientific Research XXI century: Theory and Practice, Voronezh State Forestry Engineering University Named after G.F. Morozov 3(8-2 (19-2)): 82-86, (in Russian).

Gayda S.V. (2014): Sposoby podgotovki k pererabotke vtorichno ispol'zuyemoy drevesiny iglofrezernymi i shchotochnymi stankami [Preparation methods for processing of post-consumer wood (PCW) needle-milling and brushing machines]. Actual problems of forest complex 40:65-69 (in Russian).

Gayda S.V. (2013): Resursooshchadnі tekhnologії pereroblennya vzhivanoї derevini [Resource-saving technologies of recycling of post-consumer wood]. Scientific Bulletin of NULES of Ukraine: Technology and Energy of agroindustrial complex 185(2):271-280, (in Ukrainian).

Gayda S.V., Voronovich V.V. (2011): Porіvnyal'niy analіz gnuttya vzhivanoї derevini rіznikh porіd ta vіkovikh kategorіy [Comparative analysis of bending particularities for various post-consumer wood species and age categories]. Forestry, Forest, Paper and Woodworking Industry 37(1): 84-88 (in Ukrainian).