Anaerobe treatment of organicwaste

І.G. Voytovych

doi:10.36930/42194502

Authors

І.G. Voytovych

DOI:

https://doi.org/10.36930/42194502

Keywords:

biogas, biogas technology, biogas plant, treatment waste

Abstract

The problems what it is possible to solve with helpe of biogas technology: power industry; agricultural; ecological; social were named. The type of raw materials which was investigated from 1993 y. Into laboratory of UNFU on suitability to receive of biogas were named. The technological factors that influence on process obtaining of biogas ware indicated and occasion from experience functioning of plant when don't observe to form of biogas were named.

It is established that the processing of organic waste without oxygen access from the air is a highly efficient way of obtaining quality organic fertilizers; environmentally friendly energy, which is biogas; reducing environmental pollution and improving the social conditions of residets, especially rural populations. It is recommended for installation in each rural yard where organic, small, family-type biogas plants accumulate up to 20 m³ of organic waste. It is substantiated that after being in biohumus plants, organic waste acquires better characteristics of fertilizers. It is estimated that small biohumus plants can generate enough biogas for their own needs.

References

Action BM20. (1994): Anaerobic Digestion of Animal Manure in Eastern Countries, European Commission, Directorate-General for Energy DGXVII / Thermic programme action BM20. – Marcek Study. – 201 p.

Barbara E., Schultz H. (1996): Biogas-Praxis. Grundlagen, Planung, Anlagenbau, Beispiele, Wirtschaftlichkeit, Ökobuch Verlag u. Versand. – 268 p.

Biogas-Messprogramm II – 61 Biogasanlagen im Vergleich. (2010): Bundesmessprogramm zur Bewertung neuartiger Biomasse-Biogasanlagen / Fachagentur Nachwachsende Rohstoffe e.V. (FNR), Hofplatz 1, 18276 Gülzow. – 115 p.

Charles C. and other. (1996): Hand Book of Biogas Utilization / Prepared by Second edition III E.I.T. Environmental Treatment Systems. – Atlanta: Georgia. – 188 p.

Gayda S.V. (2007). Проблема деревної сировини у Європі та Україні / Problema derevnoyi syrovyny u Yevropi ta Ukrayini [А problem of arboreal raw material is in Europe and Ukraine]. Forestry, Forest, Paper and Woodworking Industry 33:55-63 (in Ukrainian).

Gayda S.V. (2011). Recycled of post-consumer wood is for the production of particleboard in Ukraine / Proceedings of the XXI International symposium Adhesives in Woodworking Industry (Slovakia, Zvolen Juve 29 – July 01. 2011). TU Zvolen. – P. 108-121.

Gayda S.V. (2013). Techniques for utilization of post-consumer wood in the production of fuel pellets and briquettes. Proceedings of the XXI International symposium Adhesives in Woodworking Industry (Slo-vakia, Zvolen Juve 23-26. 2013). TU Zvolen, 119-130.

Gayda S.V. (2013). Розроблення технології виробництва паливних гранул на основі енергетичного потенціалу вживаної деревини [Development of technology for the production of fuel pellets based on the energy potential of used wood]. Scientific Bulletin of UNFU 23.14:83-93. (in Ukrainian).

Gayda S.V. (2013): Techniques for utilization of post-consumer wood in the production of fuel pellets and briquettes. Adhesives in Woodworking Industry : proceedings of the XXIth International Symposium, June 26 – June 28, 2013. – Technical university of Zvolen. – 2013. – Р. 163-177.

Gayda S.V. (2015). Investigation of physical and mechanical properties of post-consumer wood. Actual problems of forest complex 43:175-179, (in Russian).

Gayda S.V. (2016). Formoustoychivost' stolyarnykh plit iz vtorichno ispol'zuemoy drevesin [A form of stability of blockboards made of post-consumer wood]. Actual problems of forest complex 46:148-153, (in Russian).

Gayda S.V. (2017). Tekhnologiya i svoystva mebel'nogo shchita iz vtorichno ispol'zuemoy drevesiny [A technology and properties of furniture board made of post-consumer wood]. Actual problems of forest complex 48:34-38, (in Russian).

Gayda S.V. (2017). Використання нечітких експертних систем для підтримки прийняття рішень в процесі сортування вживаної деревини / Vykorystannya nechitkykh ekspertnykh system dlya pidtrymky pryynyattya rishenʹ v protsesi sortuvannya vzhyvanoyi derevyny [Using fuzzy expert systems for decision sup-port in the process of post-consumer wood sorting]. Forestry, Forest, Paper and Woodworking Industry 43:5-20 (in Ukrainian). doi: https://doi.org/10.36930/42174301

Gayda S.V. (2017). Комплексні дослідження зміни пружних властивостей вживаної деревини ялиці з віком / Kompleksni doslidzhennya zminy pruzhnykh vlastyvostey vzhyvanoyi derevyny yalytsi z vikom [The complex studies on the change of elastic properties of post-consumer fir wood with age]. Forestry, Forest, Pa-per and Woodworking Industry 43:58-72 (in Ukrainian). doi: https://doi.org/10.36930/42174308

Gayda S.V. (2018). A investigation and analysis of characteristics of solid furniture boards made of post-consumer wood. Forestry, Forest, Paper and Woodworking Industry, 44, 15-25. https://doi.org/10.36930/42184402 (in Ukrainian).

Gayda S.V. (2018). Strength of combined blockboard made of post-consumer wood (PCW). Bulletin of KhNTUA 197:3-9, (in Ukrainian).

Gayda S.V. (2018). Технологія МДФ-фасадів / Tekhnolohiyi MDF-Fasadiv [MDF Facade Technologies]. Forestry, Forest, Paper and Woodworking Industry 44:70-83 (in Ukrainian). doi: https://doi.org/10.36930/42184410

Gayda S.V. (2019). Scientific and technical basis of the use of used wood in woodworking: thesis of the Doctor of Technical Sciences in the specialty 05.23. – Lviv: UNFU. – 465 (in Ukrainian).

Gayda S.V., Bilyy Ya.M. (2016). The investigation of the shape stability of glued panels made of post-consumer wood. Forestry, Forest, Paper and Woodworking Industry, 42, 69-79. https://doi.org/10.36930/42164211 (in Ukrainian).

Gayda S.V., Dyak T.P. (2011). The analysis of economic efficiency of post-consumer wood use for par-ticleboard manufacture for LLC Swisspan Limited // Forestry, Forest, Paper and Woodworking Industry 37.2:129-136. doi: https://doi.org/10.36930/421137221

Gayda S.V., Kiyko O.A. (2013). Технология очистки вторично используемой древесины иглофре-зерными станками [The technology of cleaning recycled wood with needle milling machines] // Actual prob-lems and prospects of the development of LPK: materials II NTK., September 9-11, 2013 – Kostroma. – P. 36-39. (in Russian).

Gayda S.V., Kiyko O.A. (2018). Shape stability as a quality criterion for PCW-made blockboards. Pro-ceedings of the Forestry Academy of Sciences of Ukraine, 17, 185-192. https://doi.org/10.15421/411834 (in Ukrainian)

Gayda S.V., Maksimiv V.M., Kiyko O.A., Ferenc O.B. (2013). Залишки деревини та деревина після споживання. Класифікація. Терміни та визначення [Wood residues and post-consumer wood. Classification. Terms and definitions] / Agreement No. 08.24-11-1: draft international standard ISO. – Lviv: NLTU of Ukraine – 53 p. (in Ukrainian).

Gayda S.V. (2012): Productsion techniques and properties of fuel pellets produced from post-consumer wood. Forestry, Forest, Paper and Woodworking Industry 38:112-150.

Gayda, S.V. (2007). Матеріали для виготовлення виробів з деревини / Навч. посібн. – Львів: ВМС. – 160 с. (in Ukrainian).

Gayda S.V. (2013). The technological solutions for recycling of post-consumer wood. Proceedings of I International Interdisciplinary Scientific Conference Formation of stable outlook as the basis of sustainable development (Ukraine, Lviv, 14-16 March 2013) UNFU: Lviv, 5-11.

Gerasimenko V.G., Gerasimenko M.O., Tsvilikhovsky M.I. and other. (2006): Biotekhnolohiya [Biotechnology]. – Kiev: INCOS. – 647 p.

Solovey O.I., Lega Y.G., Rosen V.P. and other. (2007): Netradytsiyni ta ponovlyuvalni dzherela enerhiyi [Non-traditional and renewable energy sources]. – Cherkasy: ChSTU. – 484 p.

Voytovych I.G. (2014): Pereroblennya orhanichnykh vidkhodiv na biohaz [Рrocessing organic wastes into biogas] Bulletin of Lviv National Agrarian University. Agroengineering Research 18:42-46.