MDF-FACADE TECHNOLOGIES

S.V. Gayda

doi:10.36930/42184410

Authors

S.V. Gayda

DOI:

https://doi.org/10.36930/42184410

Keywords:

Furniture facades, MDF-facade, MDF board, facade constructions, wood products, technological processes, manufacturing technologies

Abstract

It is established that a worthy alternative to furniture facades made of natural wood are facades made of MDF materials: moldings and boards. The constructions are considered and the comparative analysis of constructions of three MDF facades is considered: MDF-Facade№1 for a hall frame-and-tile construction (a tile - a plate of MDF, bars - a MDF profile), a facade-MDF№2 for a hall frame-and-tile design (a tile) - MDF board, bars - solid wood), MDF-3 facade painted for the hallway (door base - MDF board). Modern materials for the creation of three versions of MDF facades with different structural elements and decor have been selected and calculated. A method of comparative research of technological processes of MDF facades with different components and components has been developed. Modern equipment for technological operations during the creation of MDF facades of the accepted type of research has been selected. The received equipment is calculated and the total cost for creation of three options of MDF facades is analyzed. Technological routes have been developed and plans of shops with selection of the accepted equipment for creation of three variants of MDF facades are constructed. The comparative analysis of technological processes is made and the rational variant on creation of front MDF facades of the accepted design is chosen. The payback period of investment costs for each option is calculated. It was found that the largest costs are for the second variant of the production process of MDF facades for hallways. The highest value of economic efficiency - the first option of investment. The payback period for this option is 0.41 years. Thus, it was established that the MDF facade of the frame-and-tile construction is rational and prestigious, and it is recommended for the introduction into production of technological solutions for its production for the assembly of furniture housings. In addition, the use of MDF facades in the range will give entrepreneurs the opportunity to produce quick-selling furniture products that meet the purpose, as well as aesthetic and design requirements.

References

Dyachun Z.J. [2007]: Konstruyuvannya mebliv: Korpusni vyroby [Furniture design: Cabinet prod-ucts]: - Kyiv: Mohyla Academy House, 387 p. (in Ukrainian).

Gayda S.V. (2009). The effective use of post-consumer wood is basis for diminishing of СО2-emission // Scientific Herald.  Lviv: UNFU, 19(14).72-89. (in Ukr.).

Gayda S.V. (2011). Recycled of post-consumer wood is for the production of particleboard in Ukraine / Proceedings of the XXI International symposium Adhesives in Woodworking Industry (Slovakia, Zvolen Juve 29 – July 01. 2011). TU Zvolen. – P. 108-121.

Gayda S.V. (2011). Вживана деревина – додатковий ресурс сировини / Vzhyvana derevyna – dodat-kovyy resurs syrovyny [Recovered wood is additional resource of raw material]. Forestry, Forest, Paper and Woodworking Industry 37(1). 238-244 (in Ukrainian).

Gayda S.V. (2012). Production techniques and properties of fuel pellets produced from post-consumer wood. Forestry, Forest, Paper and Woodworking Industry 38: 112-150.

Gayda S.V. (2013). Techniques for utilization of post-consumer wood in the production of fuel pellets and briquettes. Proceedings of the XXI International symposium Adhesives in Woodworking Industry (Slo-vakia, Zvolen Juve 23-26. 2013). TU Zvolen, 119-130.

Gayda S.V. (2013). Technologies and recommendations on the utilization of post-consumer wood in woodworking industry. Forestry, Forest, Paper and Woodworking Industry 39(1).48-67 (in Ukrainian).

Gayda S.V. (2013). The technological solutions for recycling of post-consumer wood. Proceedings of I International Interdisciplinary Scientific Conference Formation of stable outlook as the basis of sustainable development (Ukraine, Lviv, 14-16 March 2013) UNFU: Lviv, 5-11.

Gayda S.V. (2013). Основи формування класифікатора вторинних деревинних ресурсів / Osnovy formuvannya klasyfikatora vtorynnykh derevynnykh resursiv [Bases of secondary wood resources classifier for-mation]. Scientific Works of the Forestry Academy of Sciences of Ukraine 11:208-215 (in Ukrainian).

Gayda S.V. (2013). Розроблення технології виробництва паливних гранул на основі енергетичного потенціалу вживаної деревини [Development of technology for the production of fuel pellets based on the energy potential of used wood]. Scientific Bulletin of UNFU 23.14:83-93. (in Ukrainian).

Gayda S.V. (2014). Techniques for recycled of post-consumer wood in the production of quality parti-cleboard. Forestry, Forest, Paper and Woodworking Industry 40:41-51.

Gayda S.V. (2015). Investigation of physical and mechanical properties of post-consumer wood. Actual problems of forest complex 43:175-179, (in Russian).

Gayda S.V. (2015). Tekhnologії і fіziko-mekhanіchnі vlastivostі stolyarnikh plit іz vzhivanoї derevini [Technology and physical and mechanical properties blockboard made of post-consumer wood]. Technical ser-vice of agriculture, forestry and transport systems 3(1).145-152 (in Ukrainian).

Gayda S.V. (2016). A investigation of form of stability of variously designed blockboards made of post-consumer wood. ProLigno 12(1).22-31.

Gayda S.V. (2016). Ekologo-tekhnologicheskiye aspekty pererabotki vtorichno ispol'zuyemoy drevesiny dlya proizvodstva pressovannykh materialov [Ecological and technological aspects of recycling post-consumer wood for production compacted materials]. Lesnoy vestnik / Forestry bulletin of MSFU 20(3).15-22 (in Rus-sian).

Gayda S.V. (2016). Formoustoychivost' stolyarnykh plit iz vtorichno ispol'zuemoy drevesin [A form of stability of blockboards made of post-consumer wood]. Actual problems of forest complex 46:148-153, (in Russian).

Gayda S.V. (2016). Research on physical and mechanical characteristics of front blockboards made from post-consumer wood [Дослідження фізико-механічних характеристик фасадних столярних плит із вживаної деревини]. Forestry, Forest, Paper and Woodworking Industry 42: 33-50.

Gayda S.V. (2016). Технологічні підходи до поверхневого очищення вживаної деревини голкофре-зерним інструментом / Tekhnolohichni pidkhody do poverkhnevoho ochyshchennya vzhyvanoyi derevyny holkofrezernym instrumentom [Technological approaches to cleaning of surface of post-consumer wood of needle-milling tools]. Bulletin of KhNTUA 178:3-11(in Ukrainian).

Gayda S.V., Kiyko O.A. (2013). Технология очистки вторично используемой древесины иглофре-зерными станками [The technology of cleaning recycled wood with needle milling machines] // Actual prob-lems and prospects of the development of LPK: materials II NTK., Sept. 9-11, 2013 – Kostroma. – P. 36-39.

Gayda S.V., Maksimiv V.M., Kiyko O.A., Ferenc O.B. (2013). Залишки деревини та деревина після споживання. Класифікація. Терміни та визначення [Wood residues and post-consumer wood. Classification. Terms and definitions] / Agreement No. 08.24-11-1: draft international standard ISO. – Lviv: NLTU of Ukraine – 53 p. (in Ukrainian).

Gayda S.V. (2017). Tekhnologiya i svoystva mebel'nogo shchita iz vtorichno ispol'zuemoy drevesiny [A technology and properties of furniture board made of post-consumer wood]. Actual problems of forest complex 48:34-38, (in Russian).

Gayda S.V. (2017). Використання нечітких експертних систем для підтримки прийняття рішень в процесі сортування вживаної деревини / Vykorystannya nechitkykh ekspertnykh system dlya pidtrymky pryynyattya rishenʹ v protsesi sortuvannya vzhyvanoyi derevyny [Using fuzzy expert systems for decision sup-port in the process of post-consumer wood sorting]. Forestry, Forest, Paper and Woodworking Industry 43:5-20 (in Ukrainian). doi: https://doi.org/10.36930/42174301

Gayda S.V. (2017). Комплексні дослідження зміни пружних властивостей вживаної деревини ялиці з віком / Kompleksni doslidzhennya zminy pruzhnykh vlastyvostey vzhyvanoyi derevyny yalytsi z vikom [The complex studies on the change of elastic properties of post-consumer fir wood with age]. Forestry, Forest, Pa-per and Woodworking Industry 43:58-72 (in Ukrainian). doi: https://doi.org/10.36930/42174308

Gayda S.V. (2018). Дослідження та аналіз характеристик щитових конструкцій із вживаної дере-вини / Doslidzhennya ta analiz kharakterystyk shchytovykh konstruktsiy iz vzhyvanoyi derevyny [A investigation and analysis of characteristics of solid furniture boards made of post-consumer wood]. Forestry, Forest, Paper and Woodworking Industry 44:14-24 (in Ukrainian). doi: https://doi.org/10.36930/42184402

Gayda S.V., Voronovich V.V. (2011). Porіvnyal'niy analіz gnuttya vzhivanoї derevini rіznikh porіd ta vіkovikh kategorіy [Comparative analysis of bending particularities for various post-consumer wood species and age categories]. Forestry, Forest, Paper and Woodworking Industry 37(1). 84-88 (in Ukrainian).

Gayda S.V. (2000). Materials for the Productsion of wood Productss. Lviv: BMC. – 160 p.

Gayda S.V. (2001). Rational constructing of wood Productss. Lviv: BMC. – 93 p.

Gayda S.V., Voytovych I.G. (2017). Дослідження міцності та стійкості елементів ґратчастих меб-левих виробів із вживаної деревини / Doslidzhennya mitsnosti ta stiykosti elementiv gratchastykh meblevykh vyrobiv iz vzhyvanoyi derevyny [Durability and stability of elements for beam furniture products made from post-consumer wood are investigated]. Bulletin of KhNTUA 189:62-70 (in Ukrainian).

Gayda S.V., Ya.M. Bilyy (2016). Дослідження формостійкості клеєних щитів із вживаної дереви-ни / Doslidzhennya formostiykosti kleyenykh shchytiv iz vzhyvanoyi derevyny [The investigation of the shape stability of glued panels made of post-consumer wood]. Forestry, Forest, Paper and Woodworking Industry 42: 69-79 (in Ukrainian). doi: https://doi.org/10.36930/42164211

Gayda S.V. (2016). Технологічні підходи до поверхневого очищення вживаної деревини гол-кофрезерним інструментом / Tekhnolohichni pidkhody do poverkhnevoho ochyshchennya vzhyvanoyi derevyny holkofrezernym instrumentom [Technological approaches to cleaning of surface of post-consumer wood of needle-milling tools]. Bulletin of KhNTUA 178:3-11 (in Ukrainian).

Gayda, S.V. [2007]: Проблема деревної сировини у Європі та Україні / Problema derevnoyi syrovyny u Yevropi ta Ukrayini [А problem of arboreal raw material is in Europe and Ukraine]. Forestry, For-est, Paper and Woodworking Industry 33:55-63 (in Ukrainian).

Gayda, S.V., Maksymiv, V.M. [2007]: Аналіз, особливості, проблеми та досвід використання додаткових ресурсів сировини – відходів та вживаної деревини / Analiz, osoblyvosti, problemy ta dosvid vykorystannya dodatkovykh resursiv syrovyny – vidkhodiv ta vzhyvanoyi derevyny [Analysis, features, problems and experience of the use of additional resources of raw material – wastes and of used wood]. Forestry, Forest, Paper and Woodworking Industry 33:63-73 (in Ukrainian).

Voytovych I.G. [2010]: Osnovy tekhnolohiyi vyrobiv z derevyny [Fundamentals of wood products technology]. - Lviv: Country of Angels, 305 p. (in Ukrainian).

Zayats I.M. [1995]: Tekhnolohiya vyrobiv z derevyny [Technology of wood products]: Kyiv, 1995. (in Ukrainian).