ДОСЛІДЖЕННЯ СКЛАДНИХ СИСТЕМ У МАШИНОБУДУВАННІ НА ОСНОВІ МЕТОДУ СТРУКТУРНИХ МАТРИЦЬ

Борис Бакай

doi:10.36930/42174311

Authors

B.Ya. Bakay Ukrainian National Forestry University https://orcid.org/0000-0002-8707-9895

DOI:

https://doi.org/10.36930/42174311

Keywords:

complex systems; structural matrices; mechanical engineering.

Abstract

The use of the method of structural matrices for the structural representation and research of complex dynamic systems is proposed, which allows using the specific form of writing the matrix of coefficients, without resorting to additional graphic images, it is convenient to lay the foundations for building a system of any physical essence in mechanical engineering. The given method on the basis of the proposed algorithm and the standardized form of the structural matrix can be used to develop the structure of not only engineering systems. In the long term, the method of structural matrices will be widely used in the study of complex structures of mechanical engineering of those ecosystems. All these systems in sectoral engineering are complex systems, so their representation on structural matrices, with the reflection of direct and feedback, allows us to determine a number of unconsidered interactions before.

References

Field, F., Kirchain, R., and R. Roth. Process Cost Modeling: Strategic Engineering and Economic Evaluation of Materials Technologies, Journal of Metals, 2007. – vol. 49, iss. 10. – P. 1543-1581.

Kirchain, R. and Field, F. Process-Based Cost Modeling: Understanding the Economics of Technical Decisions, in Encyclopedia of Materials Science & Engineering, Elsevier Science, 2000. vol. 2. – P. 1718-27.

Timothy A. Davis, Sivasankaran Rajamanickam, and Wissam M. Sid-Lakhdar. A survey of direct methods for sparse linear systems / Acta Numerica, v. 25, Cambridge University Press, 2016. – 383-566 pp.

Shatihin L.G. Strukturnyye matritsy i ikh primeneniye dlya issledovaniya sistem [Structural matrices and their application for the study of systems]. – M.: Mashinostroenie, 1991. – 256 p. (in Russian).

Blinnikov V.I. Ispol'zovaniye strukturnykh matrits i obobshchennykh grafov pri vyyavlenii izobreteniy [The use of structural matrices and generalized graphs in the detection of inventions]. – M.: VNIIPI, 1991. – 59 p. (in Russian).

Gayda S.V. (2015): Modeling properties of blockboards made of post-consumer wood on the basis of the finite element method. Forestry, Forest, Paper and Woodworking Industry 41:39-49.

Gayda S.V. (2015): Issledovanie fiziko-mekhanicheskikh svoystv vtorichno ispol'zuemoy drevesiny [Investigation of physical and mechanical properties of post-consumer wood]. Actual problems of forest complex 43:175-179, (in Russian).

Gayda S.V. (2014): Teoreticheskoye obosnovaniye podkhoda po prognozirovaniyu prochnosti drevesnostruzhechnykh plit iz vtorichno ispol'zuyemoy drevesiny [The theoretical rationale for the approach on the prediction the strength of particleboard from recycled wood]. Actual problems of forest complex 38:212-216 (in Russian).

Gayda S.V. (2014): Techniques for recycled of post-consumer wood in the production of quality particleboard. Forestry, Forest, Paper and Woodworking Industry 40:41-51.

Gayda S.V., Voytovych I.G. (2017): Дослідження міцності та стійкості елементів ґрат-частих меблевих виробів із вживаної деревини / Doslidzhennya mitsnosti ta stiykosti elementiv gratchastykh meblevykh vyrobiv iz vzhyvanoyi derevyny [Durability and stability of elements for beam furniture products made from post-consumer wood are investigated]. Bulletin of KhNTUA 189:62-70 (in Ukrainian).

Gayda S.V. (2017): Tekhnologiya i svoystva mebel'nogo shchita iz vtorichno ispol'zuemoy drevesiny [A technology and properties of furniture board made of post-consumer wood]. Actual problems of forest complex 48:34-38, (in Russian).

Gayda S.V. (2016): Технологічні підходи до поверхневого очищення вживаної дереви-ни голкофрезерним інструментом / Tekhnolohichni pidkhody do poverkhnevoho ochyshchennya vzhyvanoyi derevyny holkofrezernym instrumentom [Technological approaches to cleaning of surface of post-consumer wood of needle-milling tools]. Bulletin of KhNTUA 178:3-11(in Ukrainian).

Gayda S.V. (2016): Research on physical and mechanical characteristics of front blockboards made from post-consumer wood [Дослідження фізико-механічних характеристик фасадних столярних плит із вживаної деревини]. Forestry, Forest, Paper and Woodworking Industry 42: 33-50.

Gayda S.V., Ya.M. Bilyy (2016): Дослідження формостійкості клеєних щитів із вжива-ної деревини / Doslidzhennya formostiykosti kleyenykh shchytiv iz vzhyvanoyi derevyny [The investigation of the shape stability of glued panels made of post-consumer wood]. Forestry, Forest, Paper and Woodworking Industry 42: 69-79 (in Ukrainian).

Gayda S.V. (2016): Formoustoychivost' stolyarnykh plit iz vtorichno ispol'zuemoy drevesin [A form of stability of blockboards made of post-consumer wood]. Actual problems of forest complex 46:148-153, (in Russian).

Gayda S.V. (2015): Tekhnologії і fіziko-mekhanіchnі vlastivostі stolyarnikh plit іz vzhivanoї derevini [Technology and physical and mechanical properties blockboard made of post-consumer wood]. Technical service of agriculture, forestry and transport systems 3(1):145-152, (in Ukrainian).